1994 Yamaha FZR600

Front Brake binding but not excessively (1.2.1 (f))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Suspension pin, bush or joint worn but not resulting in excessive movement slight free play in mono shock link pins bushes (5.3.4 (a) (i))

exhaust slightly fouling swing arm

front brake slightly spongy

Brake component insecure rear brake tourqe arm front bolt r clip missing (1.1.21 (c))

Front Brake component insecure all front brake pad mounting pins insecure r clips missing (1.1.21 (c))

Front Direction indicator likely to become detached fairing mounting screws missing (4.4.1 (c) (ii))

Motorcycle structure joining/attachment plate or fastening insecure fairing screen loose fairing loose around indicaters (6.1.1 (b) (i))

Motorcycle structure joining/attachment plate or fastening insecure gear lever pinch bolt loose (6.1.1 (b) (i))

Nearside Front Footrest insecure foot peg mount nut loose (6.2.12 (a))

Steering headbearing has excessive wear or free play both (2.2.2 (f) (i))

Suspension component ball joint excessively worn swing arm bearings have excessive free play (5.3.4 (a) (i))

Riders seat insecure (6.2.5 (a) (ii)) DANGEROUS

Front Brake binding but not excessively (1.2.1 (f))

Front Position lamp insecure (4.2.1 (c) (i))

Offside Front Shock absorber has a light misting of oil (5.3.2 (b))

Suspension pin, bush or joint worn but not resulting in excessive movement slight free play in mono shock link pins bushes (5.3.4 (a) (i))

exhaust slightly fouling swing arm

front brake slightly spongy

Exhaust excessively deteriorated (7.1.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Rear reflector on motorcycle missing (1.4.1)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Headlamp aim too low (1.6)

Number plate may not be legal.

Drive chain slightly loose (6.2.1d)

Rear Drive chain worn but not considered excessive (6.2.1e)

Drive chain slightly loose (6.2.1d)

Headlamp aim too high (1.6)

Rear Drive chain worn but not considered excessive (6.2.1e)

Front shock absorber seal failed and leaking oil (2.3.3)

Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.3)