2004 Mazda Bongo

Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced By body mount (6.1.1 (c) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner sill area by body mount (6.1.1 (c) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By rear suspension and inner arch (5.3.6 (a) (i))

Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced By chassis leg (6.1.1 (c) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By rear suspension and inner arch (5.3.6 (a) (i))

Windscreen washer not working (3.5 (a))

Front Integral body structure is corroded but structural rigidity is not significantly reduced Radiator support panel (6.1.1 (c) (i))

Front Play in steering rack inner joint(s)

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Power steering pipe/hose has slight seepage (2.1.5 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced Crossmember (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill area (6.1.1 (c) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Play in steering rack inner joint(s)

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Exhaust system insecure (6.1.2 (a))

Nearside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Front Brake disc contaminated (1.1.14 (b))

Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced Inner sill area (7.1.1 (a) (i))

Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))

Offside Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Windscreen washer not working (3.5 (a))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced Crossmember (6.1.1 (c) (i))

Nearside Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Integral body structure is corroded but structural rigidity is not significantly reduced Inner sill area (6.1.1 (c) (i))

Nearside Rear Anti-roll bar pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Play in steering rack inner joint(s)

Power steering component has slight seepage from a component (2.1.5 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Cross member corroded (6.1.1 (c) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Play in steering rack inner joint(s)

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By suspension mount (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By front suspension mount (5.3.6 (a) (i))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By suspension mount (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis leg by shock mount (5.3.6 (a) (i))

Battery insecure but not likely to fall from carrier (4.13 (a) (i))

Coolant leak

Front Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened (5.3.3 (b) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Front Crossmember (6.1.1 (c) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Service brake binding but not excessively (1.2.1 (f))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Play in steering rack inner joint(s)

Rear Anti-roll bar linkage pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Vehicle structure is corroded but structural rigidity is not significantly reduced Both inner sills corroded (6.1.1 (c) (i))

Brake pedal anti-slip provision worn smooth (1.1.2 (c))

Front Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Fuel cap/sealing device ineffective Seal damaged (6.1.3 (b) (i))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Nearside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill (5.3.3 (b) (i))

Nearside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened outter sill (5.3.3 (b) (i))

Offside Front Suspension arm attachment bracket/mounting corroded and seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm attachment bracket/mounting corroded and seriously weakened inner sill (5.3.3 (b) (i))

Rear Anti-roll bar pin or bush excessively worn (5.3.4 (a) (i))

Rear fog lamp not working (4.5.1 (a) (ii))

Battery insecure but not likely to fall from carrier X2 (4.13 (a) (i))

Bottom of tailgate taped

Corrosion- suspension mountings, chassis, under body

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Sub-frame corroded but not seriously weakened Including suspension arms (5.3.3 (b) (i))

Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

INNER SILLS CORRODED, HOLED BUT NOT WITHIN 30CM OF MOUNTINGS

Rear Tyre worn close to legal limit/worn on edge O/S and N/S (5.2.3 (e))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Shock absorbers has light misting of oil (5.3.2 (b))

Offside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Rear fog lamp not working (4.5.1 (a) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mtg (5.3.6 (a) (i))

Offside Front Anti-roll bar ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))

Nearside Front Brake pad(s) wearing thin (1.1.13 (a) (ii))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Rear Brake pipe corroded, covered in grease or other material All (1.1.11 (c))

Rear Suspension arm corroded but not seriously weakened All (5.3.3 (b) (i))

Rear Underseal on Rear Chassis and body

Nearside Rear Suspension component mounting repair covered in underseal general areas (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting repair covered in underseal general areas (5.3.6 (a) (i))

limited reserve travel on parking brake lever

Nearside Headlamp light intensity severely reduced (4.1.4 (a))

Offside Headlamp light intensity severely reduced (4.1.4 (a))

Nearside Rear Suspension component mounting repair covered in underseal general areas (5.3.6 (a) (i))

Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Front Anti-roll bar linkage ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))

Offside Rear Suspension component mounting repair covered in underseal general areas (5.3.6 (a) (i))

limited reserve travel on parking brake lever

Nearside Battery insecure (1.9.1)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wheel arch (5.2.6)

Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner wing behind bumper (5.2.6)

Nearside Rear Suspension component mounting prescribed area is excessively corroded outrigger area (2.4.A.3)

Offside Front Anti-roll bar linkage ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Lower Suspension arm ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Seat belt anchorage prescribed area is excessively corroded inner wing behind bumper (5.2.6)

Offside Rear Suspension component mounting prescribed area is excessively corroded outrigger and floor areas (2.4.A.3)

Exhaust mount area corroded off, but system remains secure

N/S/F and O/S/F crossmember is corroded / poorly repaired

Nearside Rear axle oil leaking near wheel bearing / hub seal area

Offside Front tyre worn on inner edge

Offside Rear wheel arch area corroded leaving hole, but not in prescribed area

Offside inner and outer sill corroded outside prescribed area

Temporary fuel cap fitted

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Rear hub oil seal leaking

Offside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Tyre worn close to the legal limit (4.1.E.1)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Fuel cap/sealing device missing (7.2.4a)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Registration plate lamp not working (1.1.C.1d)

Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Front Anti-roll bar ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front position lamp(s) not working (1.1.A.3b)

Offside Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Lower Front suspension ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Shock absorber has a serious fluid leak (2.7.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.C.1d)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Rear fog lamp not working (1.3.2b)

Nearside Rear Shock absorber has a light misting of oil (2.7.3)

Offside Front Inner Tyre worn close to the legal limit edge (4.1.E.1)

Offside Rear Inner Tyre worn close to the legal limit edge (4.1.E.1)

Offside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Rear cross member corroded away

Nearside Rear hub seal leaking oil

Nearside Front position lamp(s) not working (1.1.A.3b)

Nearside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Front Brake pipe excessively corroded (3.6.B.2c)

Offside Lower Front suspension ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Inner Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Offside Rear Outer Suspension component mounting prescribed area is excessively corroded sill (2.4.A.3)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

tow bar removed corrosion at rear not in prescribed area

Rear Exhaust system not adequately supported (7.1.1)

Nearside Front Brake pad(s) wearing thin (3.5.1g)

Nearside Rear Suspension arm has slight play in a pin/bush (2.4.G.2)

Offside Front Brake pad(s) wearing thin (3.5.1g)

Offside Rear Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Anti-roll bar linkage has excessive play in a ball joint (2.4.G.2)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Rear Exhaust system not adequately supported (7.1.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Rear Exhaust system not adequately supported (7.1.1)

Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Tyre has a bulge, caused by separation or partial failure of its structure (4.1.D.1b)

Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Headlamp aim too far to the left (1.8)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Offside Front Tyre worn close to the legal limit (4.1.E.1)

o/s/f inner sill area corroded.

o/s/r outer sill area starting to corrode.

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

n/s front tyre 3mm and worn on inner edge

Nearside Front Shock absorber has negligible damping effect (2.7.5)

Nearside Windscreen wiper blade deteriorated (8.2.2)

Offside Front Shock absorber has negligible damping effect (2.7.5)

Offside Windscreen wiper blade deteriorated (8.2.2)

Registration plate lamp not working (1.1.5c)

Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)