1993 Yamaha VMX1200

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Nearside Front Direction indicator not working (1.5.1c)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear reflector on motorcycle missing (1.4.1)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Registration plate font not substantially similar to the prescribed font (6.3.4d)

Throttle operating incorrectly (6.2.1f)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

non standard exhausts fitted

Horn control defective (1.7.2a)

Oil leak

Steering movement slightly 'notchy' (2.2.1a)

Front Brake master cylinder leaking hydraulic fluid (3.2.B1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front position lamp incorrect colour (1.1.2a)

Oil leak

Steering movement slightly 'notchy' (2.2.1a)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Hydraulic brake control feels spongy (3.1.4a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

temporary repair to exhaust system on collector and offside exhaust pipe

Offside Outer Exhaust is leaking and excessively noisey (7.1.1b)

Rear Front mudguard insecure (2.3.7)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Offside Front Brake hose slightly kinked (3.2.B3a)

oil leak around cylinder heads

Centre Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake master cylinder fluid level low (3.2.B1d)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Front Headlamp aim too high when the centre of the headlamp is below 850mm from the ground (1.6.2)

Front Horn not working (1.7.3a)