MOT Status
ValidMileage
156,781 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Central Front Suspension component mounting prescribed area excessively damaged significantly reducing structural strength (engine support area) (5.3.6 (a) (i))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (wheel arch area) (5.3.6 (a) (i))
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (wheel arch area) (5.3.6 (a) (i))
Nearside Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Nearside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength swinging arm mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength swinging arm mount (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
underside covered in underseal
Both front anti-roll bar rubber bushes deteriorated
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension arm ball joint dust cover severely deteriorated Both front (5.3.4 (b) (i))
Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both front (2.1.3 (g) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By anti-roll bar mount (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By anti-roll bar mount (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength By towing eye (5.3.6 (a) (i))
Both front anti-roll bar rubber bushes deteriorated
Nearside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Inner Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Suspension arm ball joint dust cover severely deteriorated Both front (5.3.4 (b) (i))
Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt Both front (2.1.3 (g) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Front Seat belt anchorage prescribed area is corroded but not considered excessive (7.1.1 (a) (i))
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))
Offside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Nearside Front Suspension component mounting prescribed area is excessively corroded lower arm (2.4.A.3)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner arch (5.2.6)
Nearside Rear Seat belt anchorage prescribed area is excessively corroded inner sjll (5.2.6)
Nearside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner arch (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded inner sill (5.2.6)
Offside Seat belt anchorage prescribed area is excessively corroded outer sill (5.2.6)
osf floor and rear chassis corroded but not prescribed areas
Exhaust emissions carbon monoxide content excessive (7.3.B.1a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Steering rack gaiter split (2.2.D.2d)
Nearside Rear Suspension component mounting prescribed area is excessively corroded axle mount (2.4.A.3)
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded axle mount (2.4.A.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front position lamp(s) not working (1.1.A.3b)
osr wheel arch and osf floor corroded not perscibed areas
Nearside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
rear brake pipes rusty
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
general corrosion underbody rear chassis
rear brake pipes rusty
front brake pipes corroded
fuel lines poor condition
undervehicle corroded
extensive welding covered with underseal underbody
fuel lines corroded
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Rear Brake hose ferrule excessively corroded (3.6.B.4e)
extensive welding covered with underseal underbody
fuel lines corroded
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Child seat fitted not allowing full inspection of adult belt
extensive corrosion to underside
long handbrake travel
Nearside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Brake pipe slightly corroded (3.6.B.2c)
Child seat fitted not allowing full inspection of adult belt
extensive corrosion to underside
long handbrake travel
Brake pipe slightly corroded (3.6.B.2c)
brake hoses ferrules corroded
extensive general corrosion to underside
fuel pipes corroded
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Stop lamp not working (1.2.1b)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Brake pipe slightly corroded (3.6.B.2c)
brake hose ferrules corroded
extensive general corrosion to underside
fuel pipes corroded
How Reliable is the Mazda 121?
Based on 50,730 MOT tests across 6,017 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
L465 EOH is a 1994 Mazda 121 in Red with a 1,324cc petrol engine. This vehicle has been through 31 MOT tests with a personal pass rate of 54.8%.
Across all 1994 Mazda 121 models, the average MOT pass rate is 61.0% with a typical mileage of 79,563 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mazda 121 fails its MOT is brake pipe excessively corroded, accounting for 4,459 recorded failures. If you're considering buying L465 EOH, it's worth having these areas checked by a mechanic before committing.
The Mazda 121 typically stays on UK roads for around 38 years. At 32 years old, this Mazda 121 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of L465 EOH?
You can check the full history of L465 EOH by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was L465 EOH registered?
L465 EOH is a 1994 Mazda 121, first registered on 19 May 1994.
Is L465 EOH safe to buy?
The MOT history for L465 EOH shows 31 tests with a 54.8% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does L465 EOH have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on L465 EOH. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.