1994 BMW R Series

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Fuel cap sealing washer deteriorated (7.2.2c)

Headlamp aim too low (1.6)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear suspension bush excessively deteriorated (2.4.A2a(i))

Rear suspension bush has excessive free play (2.4.A2a(i))

Steering control fouling between components which interferes with the free movement of the steering (2.1.2a)

Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars (2.1.2b)

Steering control has Insufficient clearance at full lock affecting the riders operation of the controls (2.1.2b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Front suspension assembly excessive wear or free play in a front suspension component (2.3.4)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Rear wheel bearings have slight free play (2.4.A.2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Offside Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Rear Stop lamp damaged and function impaired (1.3.3a)

Nearside Front Brake disc(s) slightly worn (3.2.A1l)