1994 Honda C90

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

No lights fitted at time of test

Front Brake binding but not excessively (1.2.1 (f))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

no lights fitted

Front Brake binding but not excessively (1.2.1 (f))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Wheel spindle locking device ineffective (5.2.1 (d))

Steering headbearing has slight free play (2.2.2 (f) (i))

Wheel alignment slightly misaligned (2.4 (a))

no lights fitted

Chain guard missing

Exhaust noisy (7.1.2)

Front Footrest insecure (6.2.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Brake lever is inoperative (3.1.3c)

Rear Brake pedal pivots excessively worn (3.1.3a)

Rear Footrest missing (6.2.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Steering headbearing has excessive free play (2.2.2)

Front wheel bearings have slight free play (2.3.5b)

Front Wheel spoke slightly loose. (4.2.1b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Exhaust is leaking but is not excessively noisey (7.1.1b)

Rear Wheel has a slightly distorted bead rim. (4.2.2)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Brake cable excessively corroded (3.2.A1b)

Riders seat insecure (6.2.1a)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Brake lever is short but brake can still be readily applied (3.1.3c)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

speedo not working