MOT Status
ValidMileage
212,035 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Vehicle structure or chassis corroded within 30cm of a mounting, but not seriously affecting overall security (6.2.2 (d) (i))
Rear Vehicle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))
Nearside Front Outer Drag link end ball joint has slight play (2.1.3 (b) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Front Tyre worn close to legal limit/worn on edge worn on edges. (5.2.3 (e))
Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge worn on edges. (5.2.3 (e))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Chassis (5.3.6 (a) (i))
Nearside Rear Tyre tread depth below requirements of 1.6mm (5.2.3 (e)) DANGEROUS
Nearside Front Tyre worn close to legal limit/worn on edge worn on edges. (5.2.3 (e))
Nearside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Offside Rear Inner Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Rear Tyre worn close to legal limit/worn on edge worn on edges. (5.2.3 (e))
Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Offside Front Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Offside Front Steering component mounting prescribed area is corroded but not considered excessive chassis (2.1.2 (e) (i))
Offside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))
Nearside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Offside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Exhaust emissions exceed level of metered smoke for a turbo charged engine (8.2.2.2 (b))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Nearside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Offside Rear Body mounting fixing insecure, but overall security not significantly reduced (6.2.2 (c) (i))
Rear Brake pipe corroded, covered in grease or other material all (1.1.11 (c))
Exhaust has a major leak of exhaust gases (6.1.2 (a))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis (5.3.6 (a) (i))
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Front Lower bull bar mounting brackets corroded
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive chassis (2.4.A.3)
Brake pipe modified but not seriously weakened front to rear (3.6.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Exhaust has a major leak of exhaust gases (7.1.2)
Brake pipe modified but not seriously weakened front to rear (3.6.A.3)
Offside Rear Brake pipe slightly corroded (3.6.B.2c)
Brake pipe excessively corroded front to rear (3.6.B.2c)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Front Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Anti-roll bar linkage has slight play in a ball joint (2.4.G.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Brake pipe slightly corroded (3.6.B.2c)
Emissions not tested (7.0)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Inner Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear fog lamp not working (1.3.2b)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front position lamp(s) not working (1.1.A.3b)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Emissions not tested (7.0)
Offside Headlamp aim beam image kick up to the offside (1.8)
o/s/r tyre outer wall slightly perished!
o/s/r tyre outer wall slightly perished!
Offside Front Shock absorber has a serious fluid leak (2.7.3)
How Reliable is the Isuzu Bighorn?
Based on 13,306 MOT tests across 1,049 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
L291 GFJ is a 2004 Isuzu Bighorn in Blue with a 3,050cc diesel engine. This vehicle has been through 32 MOT tests with a personal pass rate of 59.4%.
Across all 2004 Isuzu Bighorn models, the average MOT pass rate is 69.9% with a typical mileage of 152,298 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Isuzu Bighorn fails its MOT is fog lamp not working, accounting for 684 recorded failures. If you're considering buying L291 GFJ, it's worth having these areas checked by a mechanic before committing.
The Isuzu Bighorn typically stays on UK roads for around 34 years. At 22 years old, this Isuzu Bighorn is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of L291 GFJ?
You can check the full history of L291 GFJ by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was L291 GFJ registered?
L291 GFJ is a 2004 Isuzu Bighorn, first registered on 1 April 2004.
Is L291 GFJ safe to buy?
The MOT history for L291 GFJ shows 32 tests with a 59.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does L291 GFJ have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on L291 GFJ. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.