1994 Honda Cb 750

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2A1f(ii))

Rear Tyre worn close to the legal limit (4.1.3(ii))

silencer loose

Drive chain excessively tight (6.2.1d)

Front Brake lever cannot be applied smoothly (3.1.3d)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Exhaust mounting does not fully support the exhaust system (7.1.1.c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

Front Roller brake test indicates a slightly grabbing brake (3.3.A1b)

Rear Brake disc(s) slightly scored (3.2.A1l)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

appears that it has a very slight fuel leak at the control valve.recommend new valve fitted.

the head light assembly secured onto front forks with p clips and handlebar rubbers.and is secure at this moment.

the main stand does not return fully to the up position when the bike pushed off of the stand.

the securing nut for the speedo cable is half way down the cable so the cable is not secured at the head.speedo could stop working at anytime. is it working now ?

throttle return cable broken.

Front Brake lever cannot be applied smoothly (3.1.3d)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Motorcycle structure slightly corroded (6.1.1a)

front brake binding

rear pads low