2001 Honda SH125

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Nearside Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Offside Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Indicator switch faulty (4.4.2 (a) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front All position lamps not working (4.2.1 (a))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Shock absorber has a reduced damping effect (5.3.2 (b))

Front Tyre worn close to the legal limit (5.2.3 (e))

Indicator switch faulty (4.4.2 (a) (i))

Rear Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front suspension has a slightly reduced damping effect (2.3.6c)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake lever has inadequate reserve travel (3.1.3b)

Front Brake disc(s) slightly worn (3.2.A1l)

Front shock absorber has light misting of stanchion (2.3.3)

Front Steering movement slightly stiff (2.2.1b)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre has a bulge caused by separation or partial failure of its structure (4.1.2a(ii))

Front position lamp incorrect colour (1.1.2a)

Front Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))

Front Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Nearside Front position lamp incorrect colour (1.1.2a)

Offside Front position lamp incorrect colour (1.1.2a)

Rear Brake lever is short but brake can still be readily applied (3.1.3c)

exhaust silencer bracket could do with attention but secure

exhaust silencer noisy but acceptable

front position lamps blue but not required