2009 Kawasaki EX250

Headlamp not working on main beam (4.1.1 (a) (ii))

Horn not working (7.7 (a))

Rear Shock absorber has negligible damping effect rear suspension seized in linkage (5.3.2 (b))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Front Brake hose leaking (1.1.12 (c)) DANGEROUS

Front Brake hose leaking at joint on caliper (1.1.12 (c)) DANGEROUS

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Stop lamp does not illuminate by the operation of both brake controls rear switch inoperative (4.3.2 (a) (iii)) DANGEROUS

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Nearside Rear Upper Motorcycle structure is fractured and structural rigidity is significantly reduced fairing (6.1.1 (a) (i))

Offside Front Lower Motorcycle structure is fractured and structural rigidity is significantly reduced fairing (6.1.1 (a) (i))

Rear Brake excessively binding (1.2.1 (f))

Front Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Rear Tyre has a tear caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Drive chain slightly loose (6.1.7 (c) (i))

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Floor brake test indicates a binding brake (3.3.C2c)