2007 Proton GEN-2

Battery insecure and likely to cause a short circuit (4.13 (a) (ii))

Front Bumper insecure (6.1.4 (a) (i))

Nearside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Offside Front Anti-roll bar linkage ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i))

Nearside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Offside Front Brake hose ferrule excessively corroded and likely to fail (1.1.12 (f) (ii)) DANGEROUS

Offside Front Tyre has ply or cords exposed (5.2.3 (d) (ii)) DANGEROUS

Front Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Nearside Front Anti-lock braking system component slightly damaged (1.6 (e))

Nearside Rear Child Seat fitted not allowing full inspection of adult belt ()

Offside Front Anti-lock braking system component slightly damaged (1.6 (e))

Nearside Front Tyre worn close to the legal limit 3mm and bald on inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit 3mm and bald inner edge (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust heat shield by 02 sensor insecure

Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)

Exhaust system not adequately supported all the mounting rubbers split and insecure (7.1.1)

Nearside Rear Lower Shock absorber has an excessively worn bush (2.7.4)

Offside Rear Braking system leaking caliper (3.6.A.1)

Offside Rear Lower Shock absorber has an excessively worn bush (2.7.4)

Nearside Front Tyre worn close to the legal limit 3mm and bald on inner edge (4.1.E.1)

Offside Front Tyre worn close to the legal limit 3mm and bald inner edge (4.1.E.1)

Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)

exhaust heat shield by 02 sensor insecure

exhaust corroded and rubbers splitting

Exhaust system not adequately supported 4X rubber mounts spilt (7.1.1)

Nearside Front position lamp(s) not working (1.1.A.3b)

Offside Registration plate lamp not working (1.1.C.1d)

Front Tyre worn close to the legal limit (4.1.E.1)

Rear Tyre worn close to the legal limit (4.1.E.1)

rear exhaust rubber spilt

uneven front tyre wear

Front tyre wearing uneven

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Rear Tyre worn close to the legal limit (4.1.E.1)

oil leak from oil filter

EML on

Near side front disc grooved

Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)

n/s/f tyre worn to 2mm and on inner edge