2004 Mazda Bongo

Brake disc worn, pitted or scored, but not seriously weakened all four discs (1.1.14 (a) (ii))

Front Integral body structure is corroded but structural rigidity is not significantly reduced radiator mounting cross member (6.1.1 (c) (i))

Nearside Front Service brake binding but not excessively (1.2.1 (f))

Nearside Rear Coil spring corroded (5.3.1 (b) (i))

Nearside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Nearside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Offside Front Tyre worn close to legal limit/worn on edge inner edge (5.2.3 (e))

Offside Rear Coil spring corroded (5.3.1 (b) (i))

Offside Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Offside Rear Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (5.3.6 (a) (i))

Rear Integral body structure is corroded but structural rigidity is not significantly reduced cross member (6.1.1 (c) (i))

tow bar corroding

Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis cross brace holed ( radiator mounts) (6.1.1 (c) (i))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Front Integral body structure is corroded but structural rigidity is not significantly reduced chassis cross brace holed ( radiator mounts) (6.1.1 (c) (i))

Horn not working (7.7 (a))

Service brake efficiency below requirements (1.2.2 (a) (i))

Offside Front Seat belt webbing significantly weakened (7.1.2 (b) (ii)) DANGEROUS

Offside Front Brake disc worn, pitted or scored, but not seriously weakened surface pitting (1.1.14 (a) (ii))

both headlamp projected beam images poor

rear tyres split and worn edges

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))

Nearside Rear Position lamp not working (4.2.1 (a) (ii))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill closure (5.3.6 (a) (i))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Rear Rear fog lamp obviously incorrectly positioned (4.5.4 (a))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill closure (5.3.6 (a) (i))

Offside Rear fog lamp does not face the rear (4.5.4 (a))

Offside Rear chassis corroded

Offside Inner sill corroded

nearside headlamp projected beam image poor

rear tyres split and worn edges

Horn not working (7.7 (a) (ii))

Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))

Offside Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Nearside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Front Suspension component ball joint dust cover severely deteriorated (5.3.4 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Rear Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

Offside Front Track rod end ball joint dust cover damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Nearside Front front brake binding (3.7.B.1)

Nearside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Front front brake binding (3.7.B.1)

Offside Rear Anti-roll bar has excessive play in a pin/bush (2.4.G.2)

Nearside Front Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Nearside Front front brake binding (3.7.B.1)

Offside Front front brake binding (3.7.B.1)

Nearside Front Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Offside Front Inner Anti-roll bar has slight play in a pin/bush (2.4.G.2)

Rear brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS

front brake application uneven (3.7.B.2) DANGEROUS

front brake binding (3.7.B.1) DANGEROUS

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

all tyres cracked and perished

Offside Rear Anti-roll bar linkage has excessive play in a pin/bush (2.4.G.2)

Offside Rear fog lamp not working (1.3.2b)

all tyres cracked and perished

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Fuel system component leaking (7.2.3)

Nearside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)

Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)