2004 Honda Vt 125 C-4

Front Brake binding but not excessively (1.2.1 (f))

Exhaust has a minor leak of exhaust gases slight blow on front pipe (6.1.2 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))

Front Brake pad(s) contaminated (1.1.13 (b))

Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Central Lower Motorcycle structure is corroded but structural rigidity is not significantly reduced (6.1.1 (c) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Suspension arm corroded but not seriously weakened (5.3.3 (b) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Shock absorber has a light misting of oil Slight Weep from fork oil seals. (5.3.2 (b))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Shock absorber has a light misting of oil Slight Weep from fork oil seals. (5.3.2 (b))

Front Stop lamp not working (4.3.1 (a) (ii))

Front All direction indicators not working (4.4.1 (a) (ii))

Horn not working (7.7 (a) (ii))

Rear All direction indicators not working (4.4.1 (a) (ii))

Rear All position lamps not working (4.2.1 (a))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Shock absorber has a light misting of oil Slight Weep from fork oil seals. (5.3.2 (b))

Rear reflector on motorcycle missing (1.4.1)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Front Brake disc(s) slightly worn (3.2.A1l)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake lever is bent but brake can still be readily applied (3.1.3c)

Headlamp aim too far to the right (1.6)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Roller brake test indicates a binding brake (3.3.A1a)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake lever slightly damaged (3.2.A1c)

Exhaust slightly deteriorated (7.1.1a)

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Wheel alignment incorrect which adversely affects the steering (2.5.1)

Drive chain worn but not considered excessive (6.2.1e)

Exhaust slightly deteriorated (7.1.1a)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Roller brake test indicates a binding brake (3.3.A1a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake pedal is bent and the brake cannot be readily applied (3.1.3c)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))