2002 Kymco Zing

exhaust in poor condition

Floor brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Front Brake disc contaminated (1.1.14 (b))

Front Brake lever has insufficient reserve travel (1.1.2 (a))

Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))

exhaust in poor condition

Nearside Front Direction indicator not working (1.5.1c)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Exhaust is leaking and excessively noisey (7.1.1b)

Floor brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.C1b)

Front Exhaust mounting does not fully support the exhaust system at head (7.1.1.c)

Headlamp aim too high (1.6)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake locking device missing split pin-torque arm (3.2.A1e)

Rear Floor brake test indicates a severely grabbing brake (3.3.C2d)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake lever has inadequate reserve travel lever bent (3.1.3b) DANGEROUS

Front Brake lever is bent and the brake cannot be readily applied (3.1.3c) DANGEROUS

Rear Brake pedal cannot be applied smoothly (3.1.3d) DANGEROUS

Rear Brake pedal cannot be released smoothly (3.1.3d) DANGEROUS

Rear Brake pedal cannot be released smoothly sticks on (3.1.3d) DANGEROUS

Front Brake disc(s) has slight run out (3.2.A1m)

Drive chain excessively loose (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel spoke excessively loose (4.2.1b)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Brake disc(s) has slight run out (3.2.A1m)

Front Brake hose slightly chafed (3.2.B3a)

Rear reflector on sidecar missing (1.4.1)