2002 Ktm 200EXC

All direction indicators missing (4.4.1 (a) (ii))

Front Drive chain sprocket worn to excess (6.1.7 (c) (i))

Front Stop lamp not working (4.3.1 (a) (ii))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Horn not working (7.7 (a))

Rear Drive chain sprocket worn to excess (6.1.7 (c) (i))

Rear Position lamp not working (4.2.1 (a))

Rear Stop lamp not working (4.3.1 (a) (ii))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Registration plate does not conform to the specified requirements (0.1 (d))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Vehicle only to be used during daylight hours and not to be used at times of seriously reduced visibility. Lights taped over at time of test.

Registration plate with character(s) which are not the correct height (6.3.4a)

Front Roller brake test indicates a binding brake (3.3.A1a)

Front Tyre is incorrectly seated on the wheel rim (4.1.2b)

Headlamp aim too high (1.6)

Headlamp switch faulty (1.2.4)

Rear reflector on motorcycle missing (1.4.1)

Rear wheel bearings have excessive free play (2.4.A.2c)

Registration plate with character(s) which are not the correct height (6.3.4a)

Steering headbearing has excessive free play (2.2.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front wheel bearings have excessive free play (2.3.5b)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Chain guard missing

Rear Tyre is unsuitable (4.1.1)

Front Brake lever has inadequate reserve travel (3.1.3b)

Front Headlamp aim too high (1.6)

Front Tyre is unsuitable (4.1.1)

Chain guard missing

Rear Rear reflector on motorcycle missing (1.4.1)

Rear Registration plate characters laid out in an incorrect format (6.3.4f)

Chain guard missing