2003 Yamaha WR450F

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust noisy (8.1.1 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

headlamp deflector tape fitted

Brake disc(s) slightly worn both (3.2.A1l)

Exhaust noisy (7.1.2)

Rear suspension bearing has slight free play linkage (2.4.A2a(i))

Rear wheel bearings have slight free play (2.4.A.2c)

headlamp masks/convertors fitted

Rear suspension bearing has excessive free play swinging arm (2.4.A2a(i))

Brake disc(s) slightly worn both (3.2.A1l)

Exhaust noisy (7.1.2)

headlamp masks/convertors fitted

Brake pedal end slightly deformed

Brake pedal end slightly loose

Drive chain slightly tight (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Lights not fitted at time of test

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly stiff (2.2.1a)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Brake pedal end slightly deformed

Brake pedal end slightly loose

Drive chain slightly tight (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front Wheel has a slightly distorted bead rim. (4.2.2)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly stiff (2.2.1a)

Brake disc(s) slightly worn both (3.2.A1l)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly stiff (2.2.1b)

no lights at time of test (masked over)

rear suspension slightly stiff

Exhaust is leaking and excessively noisey (7.1.1b)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front wheel bearings are excessively rough (2.3.5b)

Front wheel bearings have excessive free play (2.3.5b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride chain link circlip insecure (6.2.1h)

Nearside Footrest insecure split pin missing (6.2.1a)

Rear Brake component has an inadequate repair inner pad heat shield insecure (3.1.5)

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Nearside Lower Front suspension assembly component missing pinch bolts (2.3.1) DANGEROUS

Brake disc(s) slightly worn both (3.2.A1l)

Front Brake fluid reservoir fluid level low (3.2.B1d)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Steering movement slightly stiff (2.2.1b)

chain adjuster locknuts loose (both)

no lights at time of test (masked over)

rear suspension slightly stiff

Front Brake disc(s) slightly worn (3.2.A1l)

Front Wheel has a slightly distorted bead rim. (4.2.2)

No lights fitted at time of test

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Wheel spoke slightly loose. (4.2.1b)

Steering headbearing has slight free play (2.2.2)

day time MOT

Brake disc(s) slightly worn (3.2.A1l)

Exhaust noisy (7.1.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly slightly bent (2.3.1)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Steering headbearing has slight free play (2.2.2)

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Wheel spoke excessively loose (4.2.1b)

Rear reflector on motorcycle missing (1.4.1)

Registration plate incorrect (6.3.1a)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Brake disc(s) slightly worn (3.2.A1l)

Exhaust noisy (7.1.2)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Front suspension assembly slightly bent (2.3.1)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Steering headbearing has slight free play (2.2.2)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Registration plate not fixed vertically, or as close to vertical as is reasonably practical (6.3.2b)

Centre Front Horn missing (1.7.1)

Centre Rear Rear reflector on motorcycle missing (1.4.1)

Centre Rear Registration plate with character(s) which are not of equal width along their entire length (6.3.4a)

Centre Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front Front wheel bearings have excessive free play (2.3.5b)

rear tyre is showimg not for road use

Offside Front Front shock absorber seal failed and leaking oil (2.3.3)