2003 Honda CG125

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front wheel bearings have excessive free play (2.3.5b)

Headlamp switch faulty (1.2.4)

Rear Brake locking device missing (3.2.A1e)

Rear Tyre is incorrectly seated on the wheel rim (4.1.2b)

Rear reflector on motorcycle missing (1.4.1)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Drive chain slightly loose (6.2.1d)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Front suspension assembly component excessively bent (2.3.1)

Front Headlamp aim too high and too far to the left. (1.6)

Front Headlamp aim too low (1.6)

Front Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Nearside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Front Handlebar handgrip not secure to handlebars. (2.1.1c)

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Drive chain excessively loose (6.2.1d)

Rear Drive chain worn to excess (6.2.1e)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Brake lever has inadequate reserve travel (3.1.3b)

Headlamp aim too high (1.6)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Front shock absorber has light misting of stanchion (2.3.3)

Steering movement slightly 'notchy' (2.2.1b)