1973 MG Midget

Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch corroded next to suspension (6.1.1 (c) (i))

Offside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner wheel arch corroded next to suspension (6.1.1 (c) (i))

slight lift in both king pins

Offside Parking brake inoperative on one side (1.4.1 (a))

Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))

Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS

Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))

slight lift in both king pins

Front Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Offside Front Axle king pin is loose in the axle beam (5.1.2 (d) (i))

Offside Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Parking brake efficiency below requirements (1.4.2 (a) (i))

Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c))

Rear Exhaust system insecure (6.1.2 (a))

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Nearside Front Lower Body has slight corrosion Footwell (6.1.B.2)

Nearside Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Leaf spring has a slightly deteriorated anchor pin rubber bush not resulting in excessive movement (2.4.B.2)

Parking brake lever has little reserve travel (3.1.6b)

Rear Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

rear brake fluctuating, but not excessively (3.7.B.3)

rear parking (secondary) brake imbalance requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.6b)

Front Exhaust has a minor leak of exhaust gases (7.1.2)

Brakes imbalanced across an axle (3.7.B.5b)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Nearside rear brake excessively fluctuating (3.7.B.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Stop lamp not working (1.2.1b)

lift in both kingpin assemblys

o/s/r brake slow in action

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Bonded suspension unit attachment fractured (2.4.F.1b)

Rear Brake hose ferrule excessively corroded (3.6.B.4e)

Nearside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Axle king pin has slight play in pin and/or bush (2.5.A.3a)

Offside Rear wheel bearing has slight play (2.6.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Horn not working (1.6.2a)

Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Nearside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Rear wheel bearing has slight play (2.6.2)

Brake performance not tested (3.7.A.1)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Offside Front Anti-roll bar rubber mounting deteriorated resulting in excessive movement (2.4.G.2)

Parking brake: efficiency below requirements (3.7.B.7)

Service brake: efficiency below requirements (3.7.B.7)

Windscreen washer provides insufficient washer liquid (8.2.3)

Brake pipe leaking (3.6.A.1) DANGEROUS

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Fuel cap/sealing device sealing washer torn (7.2.4c)

Nearside Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

Offside Axle king pin has excessive play in pin and/or bush adversely affecting the steering (2.5.A.3a)

Offside Front suspension has excessive play in a upper suspension ball joint (2.5.B.1a) DANGEROUS

Offside Rear wheel bearing has slight play (2.6.2)

Brake pedal anti-slip provision missing (3.3.A.1b)

Nearside Front Tyre has ply or cords exposed (4.1.D.1b)

Nearside Front wheel bearing has excessive play (2.5.A.3c)

Nearside Rear Tyre has ply or cords exposed (4.1.D.1b)

Offside Front Tyre has ply or cords exposed (4.1.D.1b)

Offside Front wheel bearing has excessive play (2.5.A.3c)

Offside Rear Tyre has ply or cords exposed (4.1.D.1b)

Parking brake lever has no reserve travel (3.1.6b)

Windscreen washer provides insufficient washer liquid (8.2.3)

Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Registration plate lamp not working (1.1.5c)

Parking brake: efficiency below requirements (3.7.B.7)