2002 Aprilia RS125R

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Rear Wheel alignment slightly misaligned (2.4 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake lever is short but brake can still be readily applied (1.1.2 (d))

Front Stop lamp switch does not operate in accordance with the requirements (4.3.2 (a) (i))

Rear Drive chain sprocket slightly loose (6.1.7 (c) (i))

Rear Wheel alignment slightly misaligned (2.4 (a))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front wheel bearings are slightly rough (2.3.5b)

Nearside Footrest pivot is worn

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear Seat is fitted but no footrests are provided but grab handle is fitted to the seat.

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain excessively loose (6.2.1d)

Front wheel bearings are slightly rough (2.3.5b)

Nearside Footrest pivot is worn

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear Seat is fitted but no footrests are provided but grab handle is fitted to the seat.

Steering headbearing has slight free play (2.2.2)

Wheel alignment slightly misaligned. (2.5.1)

Drive chain slightly loose (6.2.1d)

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front wheel bearings are slightly rough (2.3.5b)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

head bearings slightly notchy

slight playing rear brake pedal pivot

Rear Brake disc(s) slightly worn (3.2.A1l)

front wheel bearing noisey but no excessive movement or notchiness

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Brake disc(s) slightly worn (3.2.A1l)

front wheel bearing noisey but no excessive movement or notchiness

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Drive chain slightly loose (6.2.1d)

Front wheel bearings are slightly rough (2.3.5b)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Front wheel bearings are slightly rough (2.3.5b)

Drive chain worn but not considered excessive (6.2.1e)

front tyre incorrect size

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Brake hose excessively chafed (3.2.B3a)

Nearside Handlebar mounting clamp bolt loose (2.1.1a)

Rear Brake pedal cracked (3.1.2c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking (6.1.1c) DANGEROUS

front tyre incorrect size

Brake pad(s) close to minimum limit (3.2.A1f(i))

Tyre worn close to the legal limit (4.1.3(ii))

advise + right side pillion peg is tight on its pivot point

Drive chain excessively loose (6.2.1d)

Front wheel bearings are excessively rough (2.3.5b)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)

Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Brake pad(s) close to minimum limit (3.2.A1f(i))

Rear Tyre worn close to the legal limit (4.1.3(ii))

Direction indicator not working (1.5.1c)

Front suspension has inadequate damping effect. (2.3.6c)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Front Headlamp aim beam image kick-up is to the offside (1.6.1)

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Stop lamp does not illuminate immediately a brake applies (1.3.1a)