1993 Talbot Express

Central Exhaust mounting defective rubber missing (6.1.2 (a))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Central Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point wheel arch (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point (5.3.6 (a) (i))

Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill holed (7.1.1 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch holed (5.3.6 (a) (i))

Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear valance holed (5.3.6 (a) (i))

Central Exhaust mounting defective rubber missing (6.1.2 (a))

Nearside Front Suspension arm ball joint has slight play (5.3.4 (a) (i))

Offside Front Track rod end ball joint has slight play (2.1.3 (b) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Service brake efficiency below requirements (1.2.2 (a) (i))

Oil leak, but not excessive (8.4.1 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Oil leak, but not excessive (8.4.1 (a) (i))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

vehicle has slight corrosion to underside - age related

Main beam tell-tale not working (4.9.1 (a) (ii))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

vehicle has slight corrosion to underside - age related

All direction indicators not working (4.4.1 (a) (ii))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Nearside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Front Brake hose ferrule excessively corroded (1.1.12 (f) (i))

Offside Headlamp not working on main beam (4.1.1 (a) (ii))

Offside Rear Position lamp not working (4.2.1 (a))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Brake pipe leaking on a hydraulic braking system under passenger side (1.1.11 (b) (ii)) DANGEROUS

Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) DANGEROUS

Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) DANGEROUS

Nearside Front Vehicle structure is corroded but structural rigidity is not significantly reduced wheel arch front of (6.1.1 (c) (i))

Nearside Front Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Tyre worn close to the legal limit (4.1.E.1)

Nearside Front constant velocity joint gaiter deteriorated, but preventing the ingress of dirt (2.5.C.1a)

Nearside Rear wheel bearing has slight play (2.6.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear wheel bearing has slight play (2.6.2)

sills corroded

underside of vehicle corroded

wheel arches corroded

Nearside Windscreen wiper not operating automatically when switched on (8.2.1b)

Offside Windscreen wiper not operating automatically when switched on (8.2.1b)

Nearside Front Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Rear wheel bearing has slight play (2.6.2)

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Rear wheel bearing has slight play (2.6.2)

body in poor condition

vehicle corroded underside

Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)

Offside Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Play in steering rack inner joint(s)

body condition poor

Nearside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)

Exhaust system not adequately supported (7.1.1)

Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)

Offside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Nearside Brake pipe excessively corroded (3.6.B.2c)

Nearside Headlamp aim too low (1.8)

Offside Headlamp aim too low (1.8)

Rear Exhaust mounting missing (7.1.1b)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front constant velocity joint gaiter deteriorated (2.5.C.1a)

Offside Rear wheel bearing has slight play (2.6.2)

Brake pipe slightly corroded (3.6.B.2c)

Nearside Front Direction indicators not working (1.4.A.2c)

Offside Front Headlamp not working on main beam (1.7.5a)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Offside Rear Stop lamp not working (1.2.1b)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Steering system slightly tight (2.2.D.1)

both front brake pad warning wires broken

Brake pipe slightly corroded (3.6.B.2c)

Offside Front Shock absorber has a light misting of oil (2.7.3)

Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

Steering system slightly tight (2.2.D.1)

both front brake pad warning wires broken

Vehicle structure has slight corrosion (6.1.A.1)

some rubber mounts perishing

Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)

Rear Registration plate lamp not working (1.1.5c)

Brake pipe slightly corroded (3.6.B.2c)

Engine/gearbox mounting(s) defective

Nearside Front Headlamp aim too high (1.8)

Offside Front Headlamp aim too high (1.8)

Oil leak

Spare tyre defective

both rear tyres slightley out of shape

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)

Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Registration plate lamp not working (1.1.5c)

Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Nearside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)