1993 Kawasaki KH125

Central Front Brake pad(s) close to minimum limit (1.1.13 (a))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Central Front Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Central Front Tyre worn close to the legal limit (5.2.3 (e))

Front and rear tyre sidewall has light cracking

Front Shock absorber has a light misting of oil (5.3.2 (b))

Front Steering headbearing slightly stiff or notchy Central notch (2.2.2 (f) (i))

Offside Front Lower Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Roller brake test indicates a severely grabbing brake (3.3.A1b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Horn not working (1.7.3a)

Nearside Front Direction indicators not working (1.5.1c)

Nearside Front Footrest insecure (6.2.1a)

Nearside Rear Direction indicators not working (1.5.1c)

Offside Front Direction indicators not working (1.5.1c)

Offside Front Footrest insecure (6.2.1a)

Offside Rear Direction indicators not working (1.5.1c)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b)

Rear Brake lining(s) close to minimum limit (3.2.A1f(i))

Rear Drive chain sprocket slightly worn (6.2.1e)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Steering movement slightly 'notchy' (2.2.1b)

Rear Drive chain excessively loose (6.2.1d)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Steering movement slightly 'notchy' (2.2.1b)

Brake lever is bent and the brake cannot be readily applied (3.1.3c)

Clutch lever bent so it cannot be readily operated. (6.2.1g)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Handlebar deformed (2.1.1b)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Offside Front Brake lever is so short and the brake cannot be readily applied (3.1.3c)

batt flat 6v electrics