MOT Status
ValidMileage
121,579 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Exhaust system insecure (6.1.2 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Suspension component corroded but not seriously weakened all suspension components (5.3.3 (b) (i))
Wheel bearing has slight play both fronts (5.1.3 (a) (i))
under side heavily under sealed
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in behind head lights (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced in behind head lights (6.1.1 (c) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
Suspension component corroded but not seriously weakened all suspension components (5.3.3 (b) (i))
Wheel bearing has slight play both fronts (5.1.3 (a) (i))
under side heavily under sealed
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Nearside Rear Direction indicator not working (4.4.1 (a) (ii))
Nearside Rear Position lamp not working (4.2.1 (a) (ii))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Direction indicator not working (4.4.1 (a) (ii))
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))
Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner wheel arch (6.1.1 (c) (i))
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))
Offside Rear Direction indicator not working (4.4.1 (a) (ii))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear fog lamp not working (4.5.1 (a) (ii))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Registration plate lamp likely to become detached (4.7.1 (c) (ii))
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Stop lamp(s) all not working (4.3.1 (a) (iii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Front Inner Integral body structure is corroded but structural rigidity is not significantly reduced wing (6.1.1 (c) (i))
Offside Front Wheel bearing has slight play (5.1.3 (a) (i))
Offside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))
all suspension components corroded
whole underside of vehicle heavily undersealed
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Nearside Headlamp aim projected beam image is obviously incorrect suspect internal reflector poor (4.1.2 (c))
Nearside Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength corner (5.3.6 (a) (i))
Offside Front Body panel corroded and likely to cause injury wheel arch (6.2.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))
Offside Rear Position lamp not working (4.2.1 (a) (ii))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Brake pipe corroded, covered in grease or other material various (1.1.11 (c))
Integral body structure is corroded but structural rigidity is not significantly reduced underside (6.1.1 (c) (i))
Nearside Front Wheel bearing has slight play (5.1.3 (a) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
general underbody corrosion
Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (5.2.3 (d) (i))
Oil leak, but not excessive (8.4.1 (a) (i))
Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
general underbody corrosion
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Exhaust fumes entering cabin rear exhaust tail pipe missing (6.1.2 (b) (i))
Fuel tank leaking (6.1.3 (b) (i))
Horn not working (7.7 (a) (ii))
Nearside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))
Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Offside Front Suspension arm pin or bush excessively worn (5.3.4 (a) (i))
Offside Headlamp not working on main beam (4.1.1 (a) (ii))
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill and inside (5.3.6 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill end (5.3.6 (a) (i))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Rear Electrical wiring insulation so damaged or deteriorated it is likely to cause a short-circuit (4.11 (c) (ii))
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Rear Electrical wiring inadequately secured (4.11 (a) (i))
Exhaust mounting defective rubbers perished (6.1.2 (a))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
front and rear wheel arches historic repairs covered in underseal
Horn not working (7.7 (a) (ii))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded upper outer sill (1.1.21 (e) (i))
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced upper outer sill (7.1.1 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut top mounting inside vehicle above wheel arch (5.3.6 (a) (i))
Exhaust mounting defective rubbers perished (6.1.2 (a))
Nearside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material (1.1.11 (c))
Offside Front Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))
Offside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
Offside Rear Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))
front and rear wheel arches historic repairs covered in underseal
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s) ()
Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust rubbers missing and perished
various corrosion around front and rear wheel arches including historic repairs
Nearside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outrigger to body floor (2.4.A.3)
Nearside Seat belt anchorage prescribed area is excessively corroded upper sill top door shut (5.2.6)
Offside Headlamp not working on main beam (1.7.5a)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Lower Suspension arm has slight play in a ball joint (2.4.G.2)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
Play in steering rack inner joint(s) ()
Rear Brake pipe slightly corroded (3.6.B.2c)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
exhaust rubbers missing and perished
various corrosion around front and rear wheel arches including historic repairs
Offside Rear tyre worn low on the inner edge
Battery insecure (1.9.1)
Hazard warning switch insecure (1.4.B.1d)
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Outer Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Nearside Outer Track rod end ball joint has excessive play (2.2.B.1f)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Front Inner Suspension component mounting prescribed area is excessively corroded wheel arch (2.4.A.3)
Offside Steering rack gaiter split (2.2.D.2d)
Offside front brake excessively fluctuating (3.7.B.3)
Rear Brakes imbalanced across an axle Axle 2 (3.7.B.5b)
Side repeater not working both (1.4.A.2c)
rear brake application uneven (3.7.B.2)
Nearside front brake fluctuating, but not excessively (3.7.B.3)
Offside Rear tyre worn low on the inner edge
Suspension arm has slight play in a pin/bush Both front (2.4.G.2)
Centre Exhaust system not adequately supported (7.1.1)
Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Nearside Front Subframe mounting prescribed area is excessively corroded jacking point (2.4.A.3)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Headlamp missing glass (1.7.3)
Nearside Windscreen wiper not operating automatically when switched on (8.2.1b)
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement rear bush (2.4.G.2)
Offside Front Subframe mounting prescribed area is excessively corroded jacking point (2.4.A.3)
Offside Rear Seat belt stitching badly frayed (5.2.2b)
Offside Windscreen wiper not operating automatically when switched on (8.2.1b)
Parking brake: efficiency below requirements (3.7.B.7)
Rear registration plate deteriorated (6.3.1d)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s/f jacking point area corroded but not in a prescribed area
Nearside Front position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Rear fog lamp adversely affected by the operation of another lamp (1.3.2f)
Stop lamp adversely affected by the operation of another lamp (1.2.1f)
Offside Rear Tyre worn close to the legal limit (4.1.E.1)
o/s/f jacking point area corroded but not in a prescribed area
Nearside Track rod end ball joint has slight play (2.2.B.1f)
underside of vehicle showing signs of corrosion
Brake valve leaking (3.6.A.1)
Front registration plate deteriorated (6.3.1d)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b)
Offside Rear wheel bearing has slight play (2.6.2)
Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
front jacking points corroded
o/s/r tyre worn on inner edge
underside corroded
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced across an axle (3.7.B.5b)
Exhaust system not adequately supported (7.1.1)
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Fuel tank leaking (7.2.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Offside Inner Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Front Lower Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Vehicle structure has slight corrosion (6.1.B.2)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Rear Direction indicators not working (1.4.A.2c)
Nearside Rear Rear wheel bearing has slight play (2.6.2)
Nearside Stop lamp not working (1.2.1b)
Vehicle structure has slight corrosion (6.1.B.2)
Exhaust system not adequately supported (7.1.1)
Front registration plate deteriorated (6.3.1d)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Brake pipe inadequately supported (3.6.B.1)
Nearside Rear Direction indicator adversely affected by the operation of another lamp (1.4.A.2h)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear wheel bearing rough when rotated (2.6.1)
Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Brake pipe inadequately supported (3.6.B.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Entire underside of vehicle showing signs of corrosion
Nearside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Nearside rear tyre out of shape
Offside Front Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Oil leak
both outer sills holed not within prescribed area
exhaust system tied up with wire
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Obligatory mirror seriously damaged, affecting the rear view (8.1.2a)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Registration plate lamp not working (1.1.C.1d)
Nearside Rear Tyre worn close to the legal limit (4.1.E.1)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front Front constant velocity joint gaiter split (2.5.C.1a)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Front constant velocity joint gaiter split (2.5.C.1a)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Brake pipe excessively corroded (3.6.B.2c)
Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp aim not tested (1.8.A.1c)
Nearside Headlamp not in good working order adversely affecting beam image (1.2.4a)
Offside Headlamp aim too high (1.8)
Engine/gearbox mounting(s) defective
Nearside Rear Shock absorber has a light misting of oil (2.7.3)
Oil leak
Nearside Front Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
spare tyre danger0us and should not be used
How Reliable is the Talbot Express?
Based on 171,025 MOT tests across 8,371 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K836 PAF is a 1993 Talbot Express in White with a 2,500cc diesel engine. This vehicle has been through 37 MOT tests with a personal pass rate of 51.4%.
Across all 1993 Talbot Express models, the average MOT pass rate is 66.9% with a typical mileage of 66,330 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Talbot Express fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 6,812 recorded failures. If you're considering buying K836 PAF, it's worth having these areas checked by a mechanic before committing.
The Talbot Express typically stays on UK roads for around 41 years. At 33 years old, this Talbot Express is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K836 PAF?
You can check the full history of K836 PAF by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K836 PAF registered?
K836 PAF is a 1993 Talbot Express, first registered on 27 April 1993.
Is K836 PAF safe to buy?
The MOT history for K836 PAF shows 37 tests with a 51.4% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K836 PAF have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K836 PAF. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.