1992 Honda H100

Front Brake binding but not excessively (1.2.1 (f))

Drive chain slightly loose (6.2.1d)

Nearside Front Front shock absorber has light misting of stanchion (2.3.3)

Rear Direction indicator slightly discoloured (1.5.1b)

Front Direction indicator not working (1.5.1c)

Rear Direction indicator not working (1.5.1c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear position lamp slightly affected by the operation of another lamp (1.1.3b)

direction indicators weak operation

stop lamp has slight interaction with direction indicators

Direction indicator deteriorated and function impaired (1.5.3a)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Rear Stop lamp remains on when the brake is released (1.3.1e)

rear tyre partially deflated

Front Brake lever has inadequate reserve travel (3.1.3b)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Front Wheel has a slightly distorted bead rim. (4.2.2)

Brake reaction bracket insecure (3.2.A1j)

Centre Front Front shock absorber seal failed and leaking oil (2.3.3)

Drive chain worn to excess (6.2.1e)

Front Headlamp aim too high (1.6)

Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Rear Brake pedal has inadequate reserve travel (3.1.3b)

Rear Brake pedal is positioned so that the brake cannot be readily applied (3.1.3c)

Rear Drive chain sprocket worn to excess (6.2.1e)

Rear Registration plate deteriorated (6.3.1d)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) DANGEROUS

Front Wheel has a slightly distorted bead rim. (4.2.2)

Centre Rear Brake linkage has abnormal movement due to maladjustment (3.2.A1i)

Centre Rear Brake locking device missing (3.2.A1e)

Offside Front Direction indicator damaged but function not impaired (1.5.3a)