MOT Status
ExpiredMileage
220,061 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
deep corrosion front crossmember
deep corrosion on lower sills, wheelarches, underside rear, front & rear suspension components & brake hose ferrules
Brake master cylinder/servo mounting prescribed area is corroded but not considered excessive (3.6.C.3)
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Nearside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Nearside Side repeater not working (1.4.A.2c)
Offside Front Lower Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Vehicle structure slightly corroded within 30cm of towbar mounting (6.6.6)
deep corrosion front crossmember
deep corrosion on lower sills, wheelarches, underside rear, front & rear suspension components & brake hose ferrules
heavy crosion front suspention
heavy crosion under van all over
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Rear Exhaust has part of the system slightly deteriorated (7.1.1a)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
deep surface corrosion on underside of vehicle, front & rear xmembers, floor & underside of floor & steps
holes/corr under battery
rear brake hose ferrule corroded
rear wheel bearings slightly noisy
Nearside front brake binding (3.7.B.1)
Offside Headlamp aim too high (1.8)
Offside front brake binding (3.7.B.1)
Steering component mounting prescribed area is excessively corroded (2.2.C.1h)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
deep surface corrosion on underside of vehicle, front & rear xmembers, floor & underside of floor & steps
holes/corr under battery
rear brake hose ferrule corroded
rear wheel bearings slightly noisy
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
corrosion on nearside side door lower
deep surface corrosion on nearside inner wing below battery tray
nearside front wheel binding slightly when turned by hand
Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)
Front Sub-frame corroded but not seriously weakened (2.4.G.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Track rod end ball joint has slight play (2.2.B.1f)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Registration plate lamp not working (1.1.5c)
corrosion on nearside side door lower
deep surface corrosion on nearside inner wing below battery tray
nearside front wheel binding slightly when turned by hand
How Reliable is the Renault Master?
Based on 1,547,762 MOT tests across 123,092 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K792 MHU is a 1992 Renault Master in White with a 2,499cc diesel engine. This vehicle has been through 8 MOT tests with a personal pass rate of 62.5%.
Across all 1992 Renault Master models, the average MOT pass rate is 60.8% with a typical mileage of 102,296 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Renault Master fails its MOT is parking brake: efficiency below requirements, accounting for 69,954 recorded failures. If you're considering buying K792 MHU, it's worth having these areas checked by a mechanic before committing.
The Renault Master typically stays on UK roads for around 31 years. At 34 years old, this Renault Master is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K792 MHU?
You can check the full history of K792 MHU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K792 MHU registered?
K792 MHU is a 1992 Renault Master, first registered on 26 October 1992.
Is K792 MHU safe to buy?
The MOT history for K792 MHU shows 8 tests with a 62.5% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K792 MHU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K792 MHU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.