MOT Status
ExpiredMileage
150,381 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Headlamp aim too high (1.8)
Nearside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Offside Rear Sub-frame attachment rubber mounting deteriorated resulting in excessive movement (2.4.G.2)
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the BMW 740?
Based on 66,909 MOT tests across 7,677 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K78 CNC is a 1993 BMW 740 in Silver with a 3,982cc petrol engine. This vehicle has been through 3 MOT tests with a personal pass rate of 66.7%.
Across all 1993 BMW 740 models, the average MOT pass rate is 70.6% with a typical mileage of 137,926 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a BMW 740 fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 2,288 recorded failures. If you're considering buying K78 CNC, it's worth having these areas checked by a mechanic before committing.
The BMW 740 typically stays on UK roads for around 34 years. At 33 years old, this BMW 740 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K78 CNC?
You can check the full history of K78 CNC by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K78 CNC registered?
K78 CNC is a 1993 BMW 740, first registered on 1 January 1993.
Is K78 CNC safe to buy?
The MOT history for K78 CNC shows 3 tests with a 66.7% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K78 CNC have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K78 CNC. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.