2003 Yamaha TDR125

Headlamp aim too low (1.6)

Headlamp insecure (1.2.3b)

Brake component cracked and seriously reduced in strength (3.2.A1)

Front Brake caliper(s) securing bolt(s) loose (3.2.A1j)

Front Tyre is unsuitable (4.1.1)

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front suspension assembly component loose (2.3.1)

Front wheel bearings have excessive free play (2.3.5b)

Fuel system component leaking (7.2.1a)

Rear shock absorber seal failed and leaking oil (2.4.A.1c)

Registration plate deteriorated (6.3.1d)

Steering headbearing has excessive free play (2.2.2)

Direction indicator slightly discoloured (1.5.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Rear Brake pedal pivots slightly worn (3.1.3a)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

gear lever pivot slightly worn

Drive chain excessively loose (6.2.1d)

Front Brake hose is likely to be fouled or trapped by moving parts (3.2.B2c)

Horn not working (1.7.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Roller brake test indicates a sticking brake (3.3.A1a)

Steering headbearing has slight free play (2.2.2)

Dipswitch does not deflect the main beam/s, making them into dipped beam/s (1.2.2b(ii))

Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp (1.2.2b(i))

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Steering headbearing has slight free play (2.2.2)

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Floor brake test indicates a severely juddering brake (3.3C2d.)

Front mudguard insecure (2.3.7)

Headlamp deteriorated and function impaired (1.2.3a)

Nearside Front shock absorber seal failed and leaking oil (2.3.3)

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Wheel alignment incorrect which adversely affects the handling (2.5.1)

Rear wheel spindle loose (2.4.A.2b) DANGEROUS

Steering headbearing has slight free play (2.2.2)

Steering movement excessively 'notchy' with the weight on the lower bearing (2.2.1a)