1993 Talbot Express

Central Rear Brake load sensing valve linkage defective but function not impaired (1.1.17 (a))

Central Rear Brake load sensing valve stiff (1.1.17 (c) (ii))

Central Windscreen damaged but not adversely affecting driver's view less than 10mm (3.2 (a) (i))

Nearside Front Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Offside Front Brake hose excessively deteriorated (1.1.12 (b) (ii))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Brake load sensing valve linkage defective but function not impaired (1.1.17 (a))

Nearside Rear Brake load sensing valve stiff (1.1.17 (c) (ii))

Offside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Central Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Battery insecure and likely to fall from carrier (4.13 (a) (ii))

Nearside Headlamp reflector seriously defective (4.1.1 (b) (ii))

Nearside Side repeater not working (4.4.1 (a) (ii))

Central Rear Brake hose has slight corrosion to ferrule (1.1.12 (f) (i))

Central Windscreen damaged but not adversely affecting driver's view (3.2 (a) (i))

Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i))

Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Nearside Headlamp insecure (4.1.1 (c))

Nearside Headlamp reflector seriously defective (4.1.1 (b) (ii))

Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))

Offside Headlamp insecure (4.1.1 (c))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Nearside Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))

Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Nearside Front Direction indicator not working (4.4.1 (a) (ii))

Nearside Front Position lamp not working (4.2.1 (a) (ii))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Offside Front Headlamp insecure (4.1.1 (c))

Offside Rear Rear fog lamp not working (4.5.1 (a) (ii))

Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Nearside Front Headlamp aim too high (4.1.2 (a))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (marked (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear bumper corroded (Marked (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded (5.3.6 (a) (i))

Offside Front Headlamp aim too high (4.1.2 (a))

Offside Front Headlamp insecure adjuster corroded causing bottom of headlamp to be insecure (4.1.1 (c))

Offside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch (marked (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Outer sill corroded (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner rear bumper corroded (Marked (5.3.6 (a) (i))

Rear Exhaust emissions likely to be affected by an exhaust leak rear silencer rear pipe corroded around joint (8.2.1.1 (b))

Driver's seat moving inadvertently Bolt underneath seat slightly loose allowing movement within seat (6.2.5 (b) (ii)) DANGEROUS

Nearside Front Passenger's seat insecure Bolt underneath seat slightly loose allowing movement within seat (6.2.6 (a) (ii)) DANGEROUS

Front Brake disc worn, pitted or scored, but not seriously weakened BOTH front discs corroded / worn slighty on inner shoulders (1.1.14 (a) (ii))

Front Exhaust has a minor leak of exhaust gases front silencer both pipes corroded slightly around joints (6.1.2 (a))

Nearside Front Tyre worn close to legal limit/worn on edge tyre worn slightly unevenly across tread pattern (5.2.3 (e))

Offside Front Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension + Underbody generally corroded

Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))

Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))

Exhaust system insecure (6.1.2 (a))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Within suspension arm mounting (5.3.6 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Suspension + Underbody generally corroded

Body has slight corrosion Both front wheel arches (6.1.B.2)

Body has slight corrosion Both front wheel arches (6.1.B.2)

Rear Exhaust system not adequately supported (7.1.1)

corrosion on both outer sills and front wheel arches

corrosion on o/s/f and n/s/f inner wings

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

corrosion on o/s and n/s sills

Nearside Front Brake pipe excessively corroded (3.6.B.2c)

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)

Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)

corrosion on o/s and n/s sills

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust emissions Lambda reading after 2nd fast idle outside specified limits (7.3.D.3)

Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)

Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)

Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Headlamp insecure (1.7.3)

Offside rear brake binding (3.7.B.1)

Offside Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Brake pedal spongy (3.3.B.1b)

Brake pipe excessively corroded (3.6.B.2c)

Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Offside Front Brake pipe leaking (3.6.A.1)

Offside Headlamp insecure (1.7.3)

Offside Rear rear brake binding (3.7.B.1)

Registration plate lamp not working (1.1.C.1d)

Service brake: efficiency below requirements (3.7.B.7)

battery insecure

corrosion on the bulkhead

front discs pitted

Offside Front Front wheel bearing has slight play (2.5.A.3c)

Exhaust system not adequately supported (7.1.1)

Offside Rear rear brake binding (3.7.B.1)

Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)

Offside Front Track rod end ball joint has slight play (2.2.B.1f)

Centre Rear Exhaust mounting missing (7.1.1b)

Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)

Battery insecure

Exhaust emissions carbon monoxide content excessive (7.3.B.1a)

Nearside Rear Registration plate lamp not working (1.1.5c)

Offside Rear rear brake recording little or no effort (3.7.B.5a)

Offside Rear rear brake binding (3.7.B.1) DANGEROUS