2004 Honda CB400

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Suspension corroded but not seriously weakened Fork stantions (5.3.3 (b) (i))

Horn deteriorated

Rear Road spring corroded Nearside and offside (5.3.1 (b) (i))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Front Suspension corroded but not seriously weakened Fork stantions (5.3.3 (b) (i))

Horn deteriorated

Rear Road spring corroded Nearside and offside (5.3.1 (b) (i))

Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Stop lamp remains on when the brakes are released (4.3.2 (a) (iii))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Shock absorber has a reduced damping effect (5.3.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

rear tyre perishing on sidewalls

Rear Tyre valve stem slightly damaged (4.1.2c)

Front Tyre valve stem slightly damaged (4.1.2c)

Front Tyre worn close to the legal limit (4.1.3(ii))

Rear Tyre valve stem slightly damaged (4.1.2c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Headlamp aim too low (1.6)

bike has been lowered on suspension

repair to front tyre

Offside Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Offside Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Offside Front shock absorber seal failed and leaking oil (2.3.3)