1992 Yamaha DT125

Rear reflector missing (4.8.2 (a) (ii))

Horn not working (7.7 (a) (ii))

Wheel alignment slightly misaligned (2.4 (a))

Headlamp aim too far to the right beam kick up (4.1.2 (a))

Rear Position lamp not working (4.2.1 (a))

Wheel alignment slightly misaligned (2.4 (a))

advise condition of n/s/r indicator

Headlamp aim too low (1.6)

Advise rear pillion footrest missing

Advise to repace locking device on rear brak master cylinder

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Front suspension has a slightly reduced damping effect (2.3.6c)

Front Steering movement slightly stiff (2.2.1a)

Rear Drive chain worn but not considered excessive (6.2.1e)

Rear Exhaust noisy (7.1.2)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Rear Registration plate deteriorated (6.3.1d)

Upper Exhaust mounting missing (7.1.1c)

Advise rear pillion footrest missing

Advise to repace locking device on rear brak master cylinder

Front Brake lever is bent but brake can still be readily applied (3.1.3c)

Front Front suspension has a slightly reduced damping effect (2.3.6c)

Front Steering movement slightly stiff (2.2.1a)

Rear Exhaust noisy (7.1.2)

Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Front Brake disc(s) slightly scored (3.2.A1l)

Rear Drive chain worn but not considered excessive (6.2.1e)

Wheel alignment slightly misaligned. (2.5.1)

advise to lubricate chain

offside rear indicator, advise position

Roller brake test Higher brake efficiency normally obtainable. (3.3.A2b)

oil warning light on