1993 Harley-davidson Xlh 883

front mudguard missing

Front Shock absorber has a serious fluid leak (5.3.2 (b))

Front Shock absorber has negligible damping effect (5.3.2 (b))

Rear Wheel fixing loose (multiple fixings) drive sprocket loose (5.2.1 (a) (i))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake binding but not excessively (1.2.1 (f))

Rear Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Front wheel bearings have excessive free play (2.3.5b)

Nearside Handlebar handgrip not secure to handlebars. (2.1.1c)

Offside Exhaust markings indicating not for road use or similar wording (7.1.4)

Rear Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)

The drive belt tensioner assembly (left side) is slightly loose.

Wheel alignment slightly misaligned. (2.5.1)

Front Roller brake test indicates excessive fluctuation of brake effort (3.3.A1d)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Headlamp aim too low when the centre of the headlamp is above 850mm from the ground (1.6.3)

Rear Exhaust markings indicating not for road use or similar wording (7.1.4)

Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))