MOT Status
ExpiredMileage
123,023 miAbove average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Steering rack gaiter split (2.2.D.2d)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear fog lamp not working (1.3.2b)
Body has slight corrosion (6.1.B.2)
Fuel pipe/s corroded
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Nearside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Nearside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Headlamp has a product on the lens but not seriously reducing light output (1.7.5a)
Offside Rear Brake hose has slight corrosion to ferrules (3.6.B.4e)
Offside Rear Trailing arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Oil leak
Vehicle structure has slight corrosion (6.1.B.2)
both rear tyres worn on inside edge
Rear Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
whole underbody slightly corroded
Front Brake pad(s) wearing thin (3.5.1g)
N/S/F Anti roll bar link boot split
O/S Parking brake clip insecure
Oil leak
Underside of vehicle corroded
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Front Exhaust has a major leak of exhaust gases (7.1.2)
Front Brake pad(s) wearing thin (3.5.1g)
N/S/F Anti roll bar link boot split
O/S Parking brake clip insecure
Oil leak
Underside of vehicle corroded
Anti-lock braking system warning lamp indicates an ABS fault (3.4.1c)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Rear fog lamp missing (1.3.2a)
Registration plate lamp shows direct white light to the rear (1.1.C.1f)
Parking brake: efficiency below requirements (3.7.B.7) DANGEROUS
All Brake Discs Corroded & Pitted
Front Brake pipe slightly corroded (3.6.B.2c)
Service brake: service brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Vehicle Underbody Heavily Undersealed
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Front Shock absorber has a serious fluid leak (2.7.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Inner Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Registration plate lamp insecure (1.1.C.1c)
Nearside Steering rack gaiter split (2.2.D.2d)
Nearside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe inadequately clipped (3.6.B.1)
Offside Front Shock absorber has a serious fluid leak (2.7.3)
Offside Inner Brake pipe excessively corroded (3.6.B.2c)
Offside Inner Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Outer Brake pipe excessively corroded (3.6.B.2c)
Offside Outer Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Registration plate lamp insecure (1.1.C.1c)
Offside Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.C.1b)
Rear fog lamp missing (1.3.2a)
All corrosion on floor, sills and chassis painted blue.All repairs must be seam welded.
Parking brake lever has little reserve travel (3.1.6b)
rear discs corroded
Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Nearside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f)
Offside Front Anti-roll bar has excessive play in a pin/bush (2.4.G.2)
Offside Front Suspension arm has excessive play in a ball joint (2.4.G.2)
Offside Rear Anti-roll bar linkage fractured (2.4.G.1)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
n/s/r suspension mounting area coverd in under seal
o/s/r component mountiong area coverd in under seal
Front Exhaust mounting missing (7.1.1b)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Exhaust emissions carbon monoxide content after 2nd fast idle excessive (7.3.D.3)
Exhaust emissions carbon monoxide content at idle excessive (7.3.D.4)
Offside rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Rear brake disc slightly pitted (3.5.1h)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Offside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Parking brake: efficiency below requirements (3.7.B.7)
How Reliable is the Mitsubishi Fto?
Based on 55,254 MOT tests across 5,410 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K11 FTO is a 2000 Mitsubishi Fto in Black with a 1,998cc petrol engine. This vehicle has been through 17 MOT tests with a personal pass rate of 52.9%.
Across all 2000 Mitsubishi Fto models, the average MOT pass rate is 64.3% with a typical mileage of 106,389 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi Fto fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 4,056 recorded failures. If you're considering buying K11 FTO, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi Fto typically stays on UK roads for around 32 years. At 26 years old, this Mitsubishi Fto is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K11 FTO?
You can check the full history of K11 FTO by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K11 FTO registered?
K11 FTO is a 2000 Mitsubishi Fto, first registered on 7 September 2000.
Is K11 FTO safe to buy?
The MOT history for K11 FTO shows 17 tests with a 52.9% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K11 FTO have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K11 FTO. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.