MOT Status
ExpiredMileage
28,977 miBelow or average mileage for this year
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Oil leak
Rear Brake valve corroded but not excessively weakened (3.6.A.2b)
Wheel/tyre protruding beyond wheel arch
Windscreen has damage to an area less than a 10mm circle within zone 'A' (8.3.1a)
front and rear suspension components rusty
rear tyre sidewalls cracking
Front registration plate deteriorated (6.3.1d)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Registration plate lamp not working (1.1.C.1d)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Registration plate lamp not working (1.1.C.1d)
Nearside Front Track rod end ball joint has slight play (2.2.B.1f)
Offside Front Track rod end ball joint has slight play (2.2.B.1f)
Oil leak
Rear Brake valve corroded but not excessively weakened (3.6.A.2b)
Wheel/tyre protruding beyond wheel arch
front and rear suspension components rusty
rear tyre sidewalls cracking
Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Front brake drum worn, pitted or scored, but not seriously weakened (3.5.1i)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Offside Front Lower Suspension arm ball joint dust cover damaged, but preventing the ingress of dirt (2.4.G.2)
Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Centre Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Horn not working (1.6.2a)
Nearside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Brake hose ferrule excessively corroded (3.6.B.4e)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Upper Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Exhaust system not adequately supported (7.1.1)
Rear Spare wheel carrier insecure (6.4.2)
rear brake application uneven (3.7.B.2)
Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Front bumper insecure
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Front Upper Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Rear Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)
Nearside Front wheel bearing has slight play (2.5.A.3c)
Oil leak
Steering box deformed but serviceable (2.2.C.1d)
corrosion devolping to body
Horn not working (1.6.2a)
Nearside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear position lamp(s) incomplete (1.1.4a)
Nearside Registration plate lamp not working (1.1.5c)
Offside Front Lower Shock absorber has an excessively worn bush (2.7.4)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust system not adequately supported (7.1.1)
Horn not working (1.6.2a)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre has ply or cords exposed (4.1.D.1b)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Offside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen washer provides insufficient washer liquid (8.2.3)
Exhaust has a major leak of exhaust gases (7.1.2)
Exhaust tailpipe not capable of allowing the emission probe to be inserted (7.4.B.1)
Nearside Front Windscreen wiper does not clear the windscreen effectively (8.2.2)
Nearside Front position lamp(s) not working (1.1.A.3b)
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush (2.4.B.2)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Chassis very rusty in places but no holes within 30cm of any load bearing points on retest.
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
Rear crossmember that was failed on test is not load bearing or within 30cm of any load bearing points on retest, the spare wheel has been removed and the member is now more clearly vis-able so advisory pass given.
Nearside Front Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Brake pipe excessively corroded (3.6.B.2c)
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) DANGEROUS
Chassis very rusty in places but no holes other than those failed on test.
Nearside Front wheel bearing has slight play (2.5.A.3c)
Offside Front wheel bearing has slight play (2.5.A.3c)
How Reliable is the Mitsubishi L200?
Based on 1,362,678 MOT tests across 122,130 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
K116 WDD is a 1993 Mitsubishi L200 in White with a 2,477cc diesel engine. This vehicle has been through 15 MOT tests with a personal pass rate of 60%.
Across all 1993 Mitsubishi L200 models, the average MOT pass rate is 64.4% with a typical mileage of 123,585 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Mitsubishi L200 fails its MOT is brake pipe excessively corroded, accounting for 34,324 recorded failures. If you're considering buying K116 WDD, it's worth having these areas checked by a mechanic before committing.
The Mitsubishi L200 typically stays on UK roads for around 29 years. At 33 years old, this Mitsubishi L200 is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of K116 WDD?
You can check the full history of K116 WDD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was K116 WDD registered?
K116 WDD is a 1993 Mitsubishi L200, first registered on 1 February 1993.
Is K116 WDD safe to buy?
The MOT history for K116 WDD shows 15 tests with a 60% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does K116 WDD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on K116 WDD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.