1991 Talbot Express

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both Front Chassis Legs (6.1.1 (c) (i))

Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner Step - At B Pillar (6.2.2 (d) (i))

Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))

Offside Front Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))

Rear Position lamp not working Both Rear (4.2.1 (a) (ii))

Rear Registration plate lamp does not illuminate simultaneously with the position lamps (4.7.2 (a))

Central Front Oil leak, but not excessive (8.4.1 (a) (i))

Front Vehicle structure is corroded but structural rigidity is not significantly reduced Both Front Chassis Legs (6.1.1 (c) (i))

Rear Exhaust has a minor leak of exhaust gases Tail Pipe (Previous poor repair) (6.1.2 (a))

Nearside Front Suspension component mounting prescribed area fractured significantly reducing structural strength (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Central Exhaust has a major leak of exhaust gases TO REAR (6.1.2 (a))

Offside Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Front Service brake fluctuating, but not excessively (1.2.1 (e))

Suspension component mounting repair covered in underseal all under vehicle (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive cross member (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Nearside Front Service brake fluctuating, but not excessively (1.2.1 (e))

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive inner wheel arch (5.3.6 (a) (i))

Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Offside Front Vehicle structure has slight damage inner wing (6.1.A.1)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Upper Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

Offside Rear wheel bearing has slight play (2.6.2)

rear exhaust rubber hanger broken

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Stop lamp deteriorated, but still visible from a reasonable distance (1.2.1d)

Oil leak

Pad warning lamp wires broken.

Rear exhaust mounting rubber splitting.

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Stop lamp deteriorated, but still visible from a reasonable distance (1.2.1d)

Oil leak

both front brake pad warning wires are broken

nearside front inner wing is corroded

nearside front tyre is perished

Hazard warning switch faulty (1.4.B.1d)

Indicator switch faulty (1.4.A.1)

Nearside Headlamp aim too high (1.8)

Nearside Headlamp insecure (1.7.3)

Offside Headlamp aim beam image obviously incorrect (1.8.A.1b)

Offside Rear fog lamp not working (1.3.2b)

Rear fog lamp tell tale not working (1.3.1b)

Registration plate lamp not working (1.1.C.1d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Rear position lamp(s) deteriorated, but still visible from a reasonable distance (1.1.A.3d)

Offside Rear wheel bearing has slight play (2.6.2)

Offside Stop lamp deteriorated, but still visible from a reasonable distance (1.2.1d)

Oil leak

both front brake pad warning wires are broken

nearside front inner wing is corroded

nearside front tyre is perished

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)

Brake pedal anti-slip provision incomplete (3.3.A.1b)

Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Side repeater not working (1.4.A.2c)

Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear fog lamp not working (1.3.2b)

Offside Side repeater not working (1.4.A.2c)

Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.5b)

Nearside Front Brake hose slightly deteriorated (3.6.B.4d)

Nearside Rear wheel bearing has slight play (2.6.2)

Offside Front wheel bearing has slight play (2.5.A.3c)

corroison on floor.chassis,all inner wings and inner sills

corrosion on front subframe

Nearside Front Windscreen washer provides insufficient washer liquid (8.2.3)

Offside Front Front wheel bearing has excessive play (2.5.A.3c)

Offside Front Headlamp not working on dipped beam (1.7.5a)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Front Headlamp aim too high (hotspot upper edge above the horizontal 0% line) (1.6.D1)

Nearside Front Headlamp insecure (1.7.3)

Nearside Front constant velocity joint gaiter split (2.5.C.1a)