1992 Honda Transalp

Exhaust noisy (8.1.1 (a))

Exhaust has a major leak of exhaust gases (6.1.2 (a))

Horn sound not in accordance with requirements (7.7 (c))

Throttle operating incorrectly (6.2.7 (a) (i))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Rear Wheel fractured (5.2.2 (a)) DANGEROUS

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Wheel bearing has slight play (5.1.3 (a) (i))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear inner tube nut not secure

Wheel alignment slightly misaligned (2.4 (a))

Front Brake grabbing severely (1.2.1 (c))

Rear Shock absorber has a serious fluid leak (5.3.2 (b))

Rear reflector missing (4.8.2 (a) (ii))

Drive chain horseshoe locking device likely to become detached (6.1.7 (j) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Rear inner tube nut not secure

Wheel alignment slightly misaligned (2.4 (a))

Exhaust slightly loose (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Front Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Rear Position lamp not working (4.2.1 (a))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Exhaust slightly loose (6.1.2 (a))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust silencer slightly loose (8.1.1 (b) (i))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) DANGEROUS

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Wheel bearing has slight play (5.1.3 (a) (i))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Registration plate deteriorated but not likely to be misread (0.1 (b))

Steering headbearing has slight free play (2.2.2 (f) (i))

air box cover insecure

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Headlamp aim too high (1.6)

Horn not working (1.7.3a)

Indicator switch insecure (1.5.4)

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride (6.2.1h)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Tyre worn close to the legal limit (4.1.3(ii))

rear number plate worn

Drive chain excessively tight (6.2.1d)

Front Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) close to minimum limit (3.2.A1f(i))

Front Floor brake test indicates a slightly grabbing brake (3.3.C2d)

Front Tyre worn close to the legal limit (4.1.3(ii))

rear number plate worn

Brake master cylinder fluid level dangerously low (3.2.B1d)

Exhaust is leaking and excessively noisey (7.1.1b)

Front Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Front Wheel corroded significantly reducing the original strength (4.2.1a)

Rear Wheel corroded significantly reducing the original strength (4.2.1a)

Front Wheel corroded but not significantly reducing the original strength (4.2.1a)

Rear Wheel corroded but not significantly reducing the original strength (4.2.1a)

Front Front wheel bearings have slight free play (2.3.5b)