2003 Honda CBR400RR

Nearside Front Direction indicator slightly discoloured (4.4.3 (a))

Offside Direction indicator flashing more than 120 times a minute (4.4.4 (a))

Front Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Fasteners for rear brake master cylinder unsuitable

Front Mudguard insecure

Front Brake pad(s) close to minimum limit inners (1.1.13 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) close to minimum limit on limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Nearside Rear Footrest missing (6.2.12 (a))

Offside Rear Footrest missing (6.2.12 (a))

Rear reflector missing (4.8.2 (a) (ii))

Front Brake pad(s) close to minimum limit inners (1.1.13 (a))

Nearside Front Shock absorber has a light misting of oil (5.3.2 (b))

Rear Brake pad(s) close to minimum limit on limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre worn close to the legal limit is 1.6mm (5.2.3 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Stop lamp not working rear pedal (4.3.1 (a) (ii))

Front Tyre worn close to the legal limit is 1.6mm (5.2.3 (e))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Nearside Drive chain slightly tight (6.2.1d)

bolt missing from lower panal

Front Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Front Brake lever attachment screws missing (3.1.2b)

Front Brake pad(s) contaminated by oil or grease (3.2.A1k)

Front Fairings insecure and likely to impede the steering (2.1.2e)

Front Tyre valve stem damaged which could cause sudden tyre deflation (4.1.2c)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear Brake caliper(s) securing bolt(s) missing (3.2.A1j) DANGEROUS

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b) DANGEROUS

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a) DANGEROUS

Front Tyre worn close to the legal limit (4.1.3(ii))

rear brake pads missing

Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))