1992 Honda NS125

Drive chain fouling another component (6.2.1d)

Fairings insecure and likely to impede the steering (2.1.2e)

Front Brake disc(s) excessively worn (3.2.A1l)

Rear Rear suspension component misaligned (2.4.A.1a)

All position lamps adversely affected by the operation of another lamp (1.1.3b)

Drive chain excessively tight (6.2.1d)

Front Brake disc(s) excessively worn (3.2.A1l)

Fuel system component insecure (7.2.1b)

Horn not loud enough to be heard by another road user (1.7.3a)

Rear Brake rod excessively chafed (3.2.A1a)

Drive chain worn but not considered excessive (6.2.1e)

Drive chain worn but not considered excessive (6.2.1e)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear suspension bush has slight free play (2.4.A2a(i))

Brake pedal pivots excessively worn (3.1.3a)

Fairing so located that it is likely to impede the steering (2.1.2e)

Rear Tyre has a lump caused by separation or partial failure of its structure (4.1.2a(ii))

Front wheel bearings are slightly rough (2.3.5b)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front wheel bearings are excessively rough (2.3.5b)

Headlamp aim too high when the centre of the headlamp is above 850mm from the ground (1.6.3)

Horn sounds harsh or grating (1.7.3c)

Rear Stop lamp remains on when the brake is released (1.3.1e)

Rear mono-shock pivot excessively worn (2.4.B.4)

Upper Front suspension assembly has excessive free play in the pivot bearings. (2.3.2)