2003 Honda CB400

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Exhaust noisy (8.1.1 (a))

gear lever bent

Registration plate does not conform to the specified requirements angle of plate is too horizontal (0.1 (d))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) DANGEROUS

Exhaust noisy (8.1.1 (a))

Exhaust silencer slightly loose (8.1.1 (b) (i))

clutch lever mount lower bolt missing

gear lever bent

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front shock absorber has light misting of stanchion (2.3.3)

Sight binding front brake

Steering movement slightly 'notchy' (2.2.1a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Drive chain worn but not considered excessive (6.2.1e)

Front Roller brake test indicates slight fluctuation of brake effort (3.3.A1d)

Front Tyre worn close to the legal limit (4.1.3(ii))

Front shock absorber has light misting of stanchion (2.3.3)

Sight binding front brake

Steering movement slightly 'notchy' (2.2.1a)

Rear Tyre worn close to the legal limit (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1a)

slight binding front brake

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Headlamp aim beam image kick up to the offside (1.6)

Headlamp aim too high (1.6)

Headlamp insecure (1.2.3b)

Nearside Position lamp switch insecure (1.1.4b)

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake disc(s) has excessive run out (3.2.A1m)

Steering movement slightly 'notchy' (2.2.1b)

Nearside Rear Drive chain slightly loose (6.2.1d)

Direction indicator damaged and function impaired (1.5.3a)

Front suspension assembly component excessively misaligned (2.3.1)

Headlamp aim too high (1.6)