1992 Yamaha 535

Front Motorcycle structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Head bearings notchy

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Nearside All direction indicators not working (4.4.1 (a) (ii))

Rear Brake pedal has insufficient reserve travel (1.1.2 (a))

Registration plate does not conform to the specified requirements (0.1 (d))

Front Motorcycle structure is modified but structural rigidity is not significantly reduced (6.1.1 (d) (i))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Head bearings notchy

Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Brake performance not tested (3.3)

Front Tyre not fitted in accordance with side wall instruction/s (4.1.2e)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front wheel bearings have excessive free play (2.3.5b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Rear wheel rotation likely to be impeded (6.2.1b)

Roller brake test Neither brake control achieves an efficiency of 25% (3.3.A2b)

Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a)

Throttle operating incorrectly (6.2.1f)

Exhaust noisy (7.1.2)