MOT Status
ExpiredMileage
125,466 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Body component corroded and likely to cause injury bonnet (6.2.1 (a) (i))
Nearside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced wing (6.1.1 (c) (i))
Offside Front Brake hose ferrule excessively corroded both (1.1.12 (f) (i))
Offside Front Lower Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i))
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i))
Offside Headlamp insecure (4.1.1 (c))
Nearside Rear Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Brake pipe excessively corroded load valve to flexi (1.1.11 (c))
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))
Exhaust system insecure (6.1.2 (a))
Nearside Front Direction indicator not working (4.4.1 (a) (ii))
Nearside Front Position lamp adversely affected by the operation of another lamp (4.2.3 (c))
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))
Nearside Headlamp aim too high (4.1.2 (a))
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Nearside Side repeater not working (4.4.1 (a) (ii))
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Strut top mounting (5.3.6 (a) (i))
Offside Front Upper Brake hose ferrule excessively corroded (1.1.12 (f) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Headlamp insecure (4.1.1 (c))
Offside Rear Service brake excessively binding (1.2.1 (f))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sub frame (5.3.6 (a) (i))
Rear Brakes imbalanced across an axle (1.2.1 (b) (i))
Brake pipe corroded, covered in grease or other material front part of front to rear (1.1.11 (c))
Exhaust deteriorated slightly
Front Brakes imbalanced requirements only just met. It would appear that the braking system requires adjustment or repair. (1.2.1 (b) (i))
Nearside Front Brake hose slightly deteriorated both (1.1.12 (b) (ii))
Nearside Front Tyre worn close to legal limit/worn on edge (5.2.3 (e))
Nearside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Nearside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Offside Front Lower Brake hose slightly deteriorated (1.1.12 (b) (ii))
Offside Front Outer Drive shaft joint constant velocity boot severely deteriorated (6.1.7 (g) (i))
Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))
Offside Steering rack gaiter damaged or deteriorated, but preventing the ingress of dirt (2.1.3 (g) (i))
Nearside Rear Brake pipe corroded, covered in grease or other material on load valve........ (1.1.11 (c))
Oil leak, but not excessive (8.4.1 (a) (i))
Wheel bearing has slight play both rear........ (5.1.3 (a) (i))
Brake pipe excessively corroded front to rear (1.1.11 (c))
Headlamp aim too low both sides (4.1.2 (a))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Windscreen washer provides insufficient washer liquid (3.5 (a))
Offside Front Shock absorbers has a serious fluid leak (5.3.2 (b))
Offside Headlamp insecure (4.1.1 (c))
Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Offside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected (5.3.6 (a) (ii)) DANGEROUS
Exhaust has a minor leak of exhaust gases (6.1.2 (a))
Offside Rear Service brake binding but not excessively (1.2.1 (f))
Rear Wheel bearing has slight play both sides (5.1.3 (a) (i))
heat shield loose
vacuum hose frayed
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Front Position lamp not working (4.2.1 (a) (ii))
Nearside Position lamp not working (4.2.1 (a) (ii))
Nearside Rear Brake pipe excessively corroded (1.1.11 (c))
Offside Front Suspension component mounting prescribed area is inadequately repaired (5.3.6 (a) (i))
Offside Headlamp aim too high (4.1.2 (a))
Offside Windscreen wiper does not clear the windscreen effectively (3.4 (b) (ii))
Nearside Front Brake pipe leaking on a hydraulic braking system (1.1.11 (b) (ii)) DANGEROUS
Offside Rear Tyre has a bulge, caused by separation or partial failure of its structure (5.2.3 (d) (ii)) DANGEROUS
Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS
Battery insecure but not likely to fall from carrier (4.13 (a) (i))
Nearside Brake pipe corroded, covered in grease or other material front to rear (1.1.11 (c))
Registration plate lamp inoperative in the case of multiple lamps or light sources (4.7.1 (b) (i))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Exhaust system insecure (6.1.2 (a))
Front Position lamp not working both sides (4.2.1 (a))
Nearside Front Brake hose excessively twisted (1.1.12 (b) (ii))
Nearside Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))
Offside Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))
Offside Rear Tyre has a tear, caused by separation or partial failure of its structure (5.2.3 (d) (i))
Rear Brakes imbalanced across an axle Axle 2 (1.2.1 (b) (i))
Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))
Offside Front Vehicle structure is corroded but structural rigidity is not significantly reduced inner wing (6.1.1 (c) (i))
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Rear Brake pipe slightly corroded (3.6.B.2c)
Nearside Track rod end ball joint dust cover deteriorated, but preventing the ingress of dirt (2.2.C.1c)
Offside Rear Vehicle structure has slight corrosion (6.1.A.1)
Nearside Rear inner sill corroded
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)
repairs to all inner wheel arches
Fuel cap/sealing device sealing washer deteriorated (7.2.4c)
Nearside Side repeater not working (1.4.A.2c)
Nearside Windscreen washer provides insufficient washer liquid (8.2.3)
Nearside Rear inner sill corroded
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front Seat belt flexible stalk deteriorated but not likely to lead to failure under load (5.2.4a)
repairs to all inner wheel arches
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Front position lamp(s) not working (1.1.A.3b)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Headlamp not working on dipped beam (1.7.5a)
Nearside Headlamp not working on main beam (1.7.5a)
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Side repeater not working (1.4.A.2c)
Offside Stop lamp not working (1.2.1b)
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Registration plate lamp not working (1.1.C.1d)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Centre Exhaust system not adequately supported (7.1.1)
Nearside Rear Tyre has a tear, caused by separation or partial failure of its structure (4.1.D.1b)
Offside Headlamp aim too high (1.8)
Offside Rear Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Rear Exhaust has a major leak of exhaust gases (7.1.2)
Nearside Headlamp not working on dipped beam (1.7.5a)
Offside Rear position lamp(s) excessively deteriorated so that it is not visible from a reasonable distance (1.1.A.3d)
How Reliable is the Talbot Express?
Based on 171,025 MOT tests across 8,371 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J592 LOD is a 1991 Talbot Express in Beige with a 1,971cc petrol engine. This vehicle has been through 28 MOT tests with a personal pass rate of 57.1%.
Across all 1991 Talbot Express models, the average MOT pass rate is 65.3% with a typical mileage of 71,041 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Talbot Express fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 6,812 recorded failures. If you're considering buying J592 LOD, it's worth having these areas checked by a mechanic before committing.
The Talbot Express typically stays on UK roads for around 41 years. At 35 years old, this Talbot Express is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J592 LOD?
You can check the full history of J592 LOD by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J592 LOD registered?
J592 LOD is a 1991 Talbot Express, first registered on 1 August 1991.
Is J592 LOD safe to buy?
The MOT history for J592 LOD shows 28 tests with a 57.1% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J592 LOD have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J592 LOD. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.