1992 Talbot Express

Exhaust has a minor leak of exhaust gases (6.1.2 (a))

Front Brake pipe corroded, covered in grease or other material (1.1.11 (c))

Front Inner Suspension component mounting prescribed area is corroded but not considered excessive arches (5.3.6 (a) (i))

Integral body structure is repaired but structural rigidity is not significantly reduced outer sills (6.1.1 (d) (i))

Nearside Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

Offside Outer Integral body structure is corroded but structural rigidity is not significantly reduced sill (6.1.1 (c) (i))

Offside Rear Leaf spring shackle bracket corroded but not seriously weakened (5.3.1 (b) (i))

Rear Suspension component mounting repair covered in underseal cross member (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive chassis (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmembers (5.3.6 (a) (i))

Rear Suspension component mounting repair covered in underseal crossmember (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive both front inner arches corroding (5.3.6 (a) (i))

Main beam tell-tale not working (4.9.1 (a) (ii))

Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))

Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CROSSMEMBER (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength OUTER SILL (5.3.6 (a) (i))

Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i))

Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength CROSSMEMBER (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced OUTER SILL (7.1.1 (a) (i))

Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Indicator tell-tale missing (4.9.1 (a) (i))

Nearside Rear Suspension spring mounting prescribed area is corroded but not considered excessive CROSSMEMBER (5.3.6 (a) (i))

Nearside Rear Wheel bearing slightly noisy (5.1.3 (b) (i))

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive CHASSIS (5.3.6 (a) (i))

Rear Suspension component mounting prescribed area is corroded but not considered excessive CROSSMEMBERS (5.3.6 (a) (i))

Suspension component mounting prescribed area is corroded but not considered excessive BOTH FRONT INNER ARCHES (5.3.6 (a) (i))

Indicator tell-tale inoperative (4.9.1 (a) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))

Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))

Exhaust emissions hydrocarbon content excessive (8.2.1.2 (b))

Nearside Headlamp aim too high (4.1.2 (a))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))

Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i))

Indicator tell-tale inoperative (4.9.1 (a) (i))

Nearside Track rod end ball joint has slight play (2.1.3 (b) (i))

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive crossmember (5.3.6 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

all rear valance and floor corners slightly corroded

Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))

Nearside Headlamp not working on main beam (4.1.1 (a) (ii))

Nearside Stop lamp(s) not working (4.3.1 (a) (ii))

Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))

Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

all rear valance and floor corners slightly corroded

Nearside Front Tyre slightly damaged/cracking or perishing (5.2.3 (d) (ii))

Nearside Front tyre slightly cracking

Offside Rear Wheel bearing has slight play (5.1.3 (a) (i))

Nearside Suspension component mounting prescribed area is corroded but not considered excessive And offside front (2.4.A.3)

Offside Rear Rear wheel bearing has slight play (2.6.2)

coil spring corroded Both front (2.4.C.1b)

Front bumper insecure

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Rear Suspension spring mounting prescribed area repaired, but not inappropriately (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake lever has little reserve travel (3.1.6b)

all shock absorber casings corroded

corrosion in exhaust system

n/s and o/s sills corroded and front and rear valance

o/s/f tyre valves perrished

Battery insecure (1.9.1)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Rear Registration plate lamp not working (1.1.C.1d)

Front bumper insecure

Nearside Front Lower Suspension arm ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)

Nearside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Front coil spring corroded (2.4.C.1b)

Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Offside Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front coil spring corroded (2.4.C.1b)

Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)

Parking brake lever has little reserve travel (3.1.6b)

all shock absorber casings corroded

corrosion in exhaust system

n/s and o/s sills corroded and front and rear valance

o/s/f tyre valves perrished

Exhaust has a major leak of exhaust gases (7.1.2)

Exhaust system not adequately supported (7.1.1)

Front Windscreen wiper does not clear the windscreen effectively (8.2.2)

Offside Windscreen washer provides insufficient washer liquid (8.2.3)

Registration plate lamp not working (1.1.C.1d)

Front bumper insecure

advise discs corroed

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Offside Rear Exhaust system not adequately supported (7.1.1)

Registration plate lamp not working (1.1.C.1d)

Exhaust system not adequately supported (7.1.1)

Headlamp aim too high (1.8)

Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.4.G.2)

Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2)

Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)

Nearside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not working (1.1.C.1d)

O/S/F out rigger corroded

Offside Front Tyre worn close to the legal limit (4.1.E.1)

Parking brake: parking brake efficiency only just met. It would appear that the braking system requires adjustment or repair. (3.7.B.7)

battery insecure

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)

Offside Seat belt anchorage prescribed area is excessively corroded (5.2.6)

Registration plate lamp not working (1.1.C.1d)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Exhaust has a major leak of exhaust gases (7.1.2)

Nearside Headlamp not working on dipped beam (1.7.5a)

Nearside Headlamp not working on main beam (1.7.5a)

Registration plate lamp not working (1.1.C.1d)

front brakes release unevenly (3.7.B.4)

Front Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Subframe mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)

Offside Front Brake pipe slightly corroded (3.6.B.2c)

handbrake performance slightly low on n/s rear