1991 Yamaha XTZ660

Rear Exhaust silencer slightly loose (8.1.1 (b) (i))

Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear tyre starting to split

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Brake disc worn, but not excessively (1.1.14 (a) (i))

Front Position lamp not working (4.2.1 (a))

Front Brake binding but not excessively (1.2.1 (f))

Front Brake fluid reservoir fluid level below minimum level (1.1.10 (d) (i))

Exhaust system corroded

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Front Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Exhaust system corroded

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Tyre worn close to the legal limit (5.2.3 (e))

Exhaust system corroded

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Front Wheel bearing has excessive play (5.1.3 (a) (i))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust system corroded

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Wheel has a slightly distorted bead rim (5.2.2 (c) (i))

Central Front Tyre has a tear caused by separation or partial failure of its structure (4.1.2a(ii))

Central Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Central Front Upper Fuel cap sealing washer deteriorated Fuel cap leaking (7.2.2c)

Central Front Steering movement slightly 'notchy' (2.2.1a)

Central Rear Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Gear lever bent

Rear brake lever bent

Rear Brake pad(s) less than 1.5 mm thick (3.2.A1f(i))

Rear Brake master cylinder leaking hydraulic fluid (3.2.B1e) DANGEROUS

Gear lever bent

Rear brake lever bent

front foot rest rubbers starting to wear