1992 Kawasaki Zephyr 1100

Rear Stop lamp not working switch missing (4.3.1 (a) (ii))

Rear Brake pad(s) less than 1.0 mm thick (1.1.13 (a)) DANGEROUS

Steering movement slightly 'notchy' (2.2.1b)

Drive chain excessively tight (6.2.1d)

Drive chain worn to excess (6.2.1e)

Front shock absorber seal failed and leaking oil (2.3.3)

Rear Floor brake test indicates a sticking brake (3.3.C2c)

Rear shock absorber has inadequate damping effect. (2.4.A.3b)

Front suspension has slight stiffness in the movement of the suspension. (2.3.6b)

Steering movement slightly 'notchy' (2.2.1b)

Stop lamp does not illuminate immediately a brake applies hand control (1.3.1a)

Exhaust noisy (7.1.2)

Rear wheel bearings have slight free play (2.4.A.2c)

Exhaust noisy (7.1.2)

Headlamp aim too high (1.6)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front wheel bearings are slightly rough (2.3.5b)

Front wheel bearings have slight free play (2.3.5b)

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

slight smell of fuel

Exhaust is leaking but is not excessively noisey (7.1.1b)

Exhaust slightly deteriorated (7.1.1a)

Front Brake disc(s) slightly worn (3.2.A1l)

Front shock absorber has light misting of stanchion (2.3.3)

Oil leak

Rear Brake disc(s) slightly worn (3.2.A1l)

Rear Brake linkage clevis joint slightly worn (3.2.A1d)

Rear shock absorber has a light misting (2.4.A.1c)

Rear shock absorber has a slightly reduced damping effect (2.4.A.3b)

Steering movement slightly 'notchy' (2.2.1a)