1991 Yamaha DT50

Exhaust noisy (8.1.1 (a))

Exhaust noisy (8.1.1 (a))

Front Wheel spoke slightly corroded (5.2.2 (d))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Rear reflector missing (4.8.2 (a) (ii))

Exhaust slightly loose (6.1.2 (a))

Front Wheel spoke slightly corroded (5.2.2 (d))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Front Wheel spoke slightly corroded (5.2.2 (d))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Tyre worn close to the legal limit (5.2.3 (e))

Front Brake excessively binding (1.2.1 (f))

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp aim not tested (4.1.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Steering headbearing has excessive wear or free play (2.2.2 (f) (i))

Brake pedal has slight side movement indicating a worn pedal bearing or pivot (1.1.1 (b))

Front Wheel spoke slightly corroded (5.2.2 (d))

Rear Wheel spoke slightly corroded (5.2.2 (d))

Stop lamp slightly affected by the operation of another lamp (4.3.3 (b))

Tyre worn close to the legal limit (5.2.3 (e))

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly stiff (2.2.1a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front wheel spindle securing nut locking device missing (2.3.3a)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Rear position lamp adversely affected by the operation of the horn (1.1.3b)

Rear wheel spindle securing nut locking device missing (2.4.A.2b)

Steering movement slightly 'notchy' (2.2.1b)

Steering movement slightly stiff (2.2.1a)

Drive chain slightly loose (6.2.1d)

Steering headbearing has slight free play (2.2.2)

Front Direction indicator affected by the operation of another lamp (1.5.1c)

Front Front position lamp does not illuminate immediately when switched on (1.1.3a)

Rear Rear position lamp does not illuminate immediately when it is switched on (1.1.3a)

Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition (7.1.2)

Front Direction indicator affected by the operation of another lamp (1.5.1c)

Front Front position lamp insecure (1.1.1c)

Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort (3.3.A1c)

Front Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Front Tyre tread not clearly visible (4.1.3(i))

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i))

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Nearside Front Front shock absorber seal failed and leaking oil (2.3.3)

Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a)

Rear reflector on motorcycle missing (1.4.1)

Offside Front Front shock absorber has light misting of stanchion (2.3.3)

Oil leak

Rear Tyre worn close to the legal limit (4.1.3(i))