MOT Status
ExpiredMileage
113,811 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Brake master cylinder/servo mounting prescribed area is excessively corroded (3.6.C.3)
Front passenger door pillar insecure (6.2.B.2)
Hazard warning lamps inoperative (1.4.B.1b)
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Front Brake pipe excessively corroded (3.6.B.2c)
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear wheel bearing rough when rotated (2.6.1)
rear brake application uneven (3.7.B.2)
Play in steering rack inner joint(s)
both rear tyres perished
Body badly corroded but considered OK at time of test
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front Seat belt flexible stalk damaged but not likely to lead to failure under load (5.2.4a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s and o/s floor pans door sills under sills and crossmembers all showing signs corrosion but considered OK at time of test
Indicator switch faulty (1.4.A.1)
Nearside Front Seat belt locking mechanism does not secure or release (5.2.5a)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Nearside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Rear Brake pipe inadequately clipped (3.6.B.1)
Offside Stop lamp not working (1.2.1b)
Registration plate lamp not working (1.1.C.1d)
Body badly corroded but considered OK at time of test
Nearside Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Brake pipe slightly corroded (3.6.B.2c)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Offside Brake pipe slightly corroded (3.6.B.2c)
Offside Front Brake pipe slightly corroded (3.6.B.2c)
Offside Front Front wheel bearing has slight play (2.5.A.3c)
Offside Front Seat belt flexible stalk damaged but not likely to lead to failure under load (5.2.4a)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Seat belt anchorage prescribed area is corroded but not considered excessive (5.2.6)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
n/s and o/s floor pans door sills under sills and crossmembers all showing signs corrosion but considered OK at time of test
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
body & under side of vehicle showing signs of heavy corrosion
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Rear Brake pipe excessively corroded (3.6.B.2c)
Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Lower Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Upper Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Windscreen wiper does not clear the windscreen effectively (8.2.2)
Registration plate lamp not working (1.1.C.1d)
Windscreen washer provides insufficient washer liquid (8.2.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
body & under side of body showing signs of heavy corrosion
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
flooring & sills showing signs of heavy corrosion
Nearside Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Nearside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Outer Front constant velocity joint gaiter split (2.5.C.1a)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
flooring & sills showing signs of heavy corrosion
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Body has a projection caused by corrosion (6.1.C.1)
Offside Front Seat belt has a cut which has significantly weakened the webbing (5.2.2a)
Offside Rear Lower Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Outer Front constant velocity joint gaiter deteriorated (2.5.C.1a)
Offside Front Tyre worn close to the legal limit (4.1.E.1)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
off side sill corroded but not in a prescibed area
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Body has a sharp edge caused by corrosion (6.1.C.1)
Offside Rear Body has a sharp edge caused by corrosion (6.1.C.1)
Nearside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Rear Exhaust has a minor leak of exhaust gases (7.1.2)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Front registration plate deteriorated (6.3.1d)
Nearside Rear passenger seat cannot be secured in the upright position. (6.2.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Seat belt damaged but not affecting the operation of the belt (5.2.2a)
Offside Headlamp not in good working order but not adversely affecting beam image (1.2.4a)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone 'A' (8.3.1e)
Nearside Front Tyre worn close to the legal limit (4.1.E.1)
Nearside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Nearside Outer Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Inner Rear Suspension component mounting prescribed area is corroded but not considered excessive (2.4.A.3)
same advisorys apply as test no.180938926116
Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Seat belt anchorage prescribed area is excessively corroded (5.2.6)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Centre Exhaust has a minor leak of exhaust gases (7.1.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Windscreen has damage to an area less than a 40mm circle outside zone 'A' (8.3.1d)
general under body of vehicle showing signs of corrosion
How Reliable is the Rover Maestro?
Based on 31,503 MOT tests across 6,914 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J216 BKW is a 1992 Rover Maestro in Red with a 1,275cc petrol engine. This vehicle has been through 18 MOT tests with a personal pass rate of 50%.
Across all 1992 Rover Maestro models, the average MOT pass rate is 65.1% with a typical mileage of 76,637 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Rover Maestro fails its MOT is suspension component mounting prescribed area is excessively corroded, accounting for 3,111 recorded failures. If you're considering buying J216 BKW, it's worth having these areas checked by a mechanic before committing.
The Rover Maestro typically stays on UK roads for around 38 years. At 34 years old, this Rover Maestro is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J216 BKW?
You can check the full history of J216 BKW by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J216 BKW registered?
J216 BKW is a 1992 Rover Maestro, first registered on 24 June 1992.
Is J216 BKW safe to buy?
The MOT history for J216 BKW shows 18 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J216 BKW have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J216 BKW. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.