MOT Status
ExpiredMileage
143,684 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
Nearside Front Headlamp aim too low (4.1.2 (a))
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Nearside Rear Service brake excessively binding (1.2.1 (f))
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i))
Parking brake efficiency below requirements (1.4.2 (a) (i))
Service brake efficiency below requirements (1.2.2 (a) (i))
Nearside Front Passenger's seat insecure (6.2.6 (a) (ii)) DANGEROUS
Nearside Front Headlamp reflector slightly defective (4.1.1 (b) (i))
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Front registration plate deteriorated (6.3.1d)
Nearside Front Headlamp aim beam image obviously incorrect (1.8.A.1b)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded sill top (2.4.A.3)
Nearside Rear rear brake binding (3.7.B.1)
Offside Rear rear parking brake recording little or no effort (3.7.B.6a)
Parking brake: efficiency below requirements (3.7.B.7)
Service brake: efficiency below requirements (3.7.B.7)
Nearside Front Front wheel bearing has slight play (2.5.A.3c)
Nearside Front brake disc worn, pitted or scored, but not seriously weakened (3.5.1i)
Rear registration plate deteriorated but not likely to be misread (6.3.1d)
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Nearside Rear position lamp(s) not working (1.1.A.3b)
Nearside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt (2.2.C.1c)
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Offside Headlamp not working on dipped beam (1.7.5a)
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.D.1a)
Offside Rear position lamp(s) not working (1.1.A.3b)
Registration plate lamp not working (1.1.C.1d)
Play in steering rack inner joint(s)
nearside rear tyre tread cracked
Nearside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc (2.5.C.1a)
Nearside Rear wheel bearing has slight play (2.6.2)
Offside Rear Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Rear wheel bearing has slight play (2.6.2)
Nearside Front Headlamp not working on dipped beam (1.7.5a)
Nearside Front Headlamp not working on main beam (1.7.5a)
Offside Front Headlamp not working on dipped beam (1.7.5a)
Offside Front Headlamp not working on main beam (1.7.5a)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside front brake binding (3.7.B.1)
Offside rear brake binding (3.7.B.1)
Brakes imbalanced across an axle (3.7.B.5b) DANGEROUS
Exhaust system not adequately supported (7.1.1)
Nearside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Steering rack gaiter split (2.2.D.2d)
Offside Front Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension spring mounting prescribed area is corroded but not considered excessive (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Tyre tread depth below requirements of 1.6mm (4.1.E.1)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2)
Parts of underbody very dry and bad surface corrosion to some areas especially rear suspension areas which have been welded in past
N/S rear handbrake performance low advise internal inspection
Nearside Rear Body has a sharp edge caused by damage (6.1.C.1)
Nearside Rear Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Rear n/s handbrake reading low advise internal inspection
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is inadequately repaired (2.4.A.3)
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Nearside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension component mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Offside Rear Suspension spring mounting prescribed area is excessively corroded (2.4.A.3)
Windscreen washer provides insufficient washer liquid (8.2.3)
Parts of underbody very dirty making inspection hard and bad surface corrosion to some suspension areas
How Reliable is the Talbot Express 1300 D?
Based on 18,667 MOT tests across 1,237 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
J184 KFV is a 1991 Talbot Express 1300 D in White with a 2,500cc diesel engine. This vehicle has been through 22 MOT tests with a personal pass rate of 50%.
Across all 1991 Talbot Express 1300 D models, the average MOT pass rate is 65.8% with a typical mileage of 75,966 miles. This particular vehicle has a lower pass rate than the average for its year, which may indicate maintenance issues worth investigating.
The most common reason a Talbot Express 1300 D fails its MOT is brake pipe excessively corroded, accounting for 704 recorded failures. If you're considering buying J184 KFV, it's worth having these areas checked by a mechanic before committing.
The Talbot Express 1300 D typically stays on UK roads for around 38 years. At 35 years old, this Talbot Express 1300 D is approaching the upper end of the typical lifespan for this model.
Frequently Asked Questions
How do I check the history of J184 KFV?
You can check the full history of J184 KFV by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was J184 KFV registered?
J184 KFV is a 1991 Talbot Express 1300 D, first registered on 3 December 1991.
Is J184 KFV safe to buy?
The MOT history for J184 KFV shows 22 tests with a 50% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does J184 KFV have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on J184 KFV. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.