2017 Honda Msx

Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i))

Front Brake grabbing severely (1.2.1 (c))

Headlamp aim too high (4.1.2 (a))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))

Throttle control functioning such that safe operation of the motorcycle is adversely affected insecure (6.2.7 (a) (ii)) DANGEROUS

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Both front indicators fouling body work but not substantially.

Exhaust noisy (8.1.1 (a))

Foot gear selector bent.

L plate wrapped around rear shocker making full inspection difficult.

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))

Rear Wheel bearing has excessive play (5.1.3 (a) (i))

Registration plate inscription illegible washers covering letter/number (0.1 (b))

Rear Tyre tread depth is below minimum requirements of 1.0mm (5.2.3 (e)) DANGEROUS

Drive chain sprocket worn, but not excessively (6.1.7 (c) (i))

Drive chain worn but not considered excessive (6.1.7 (c) (i))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Drive chain excessively loose (6.1.7 (c) (i))

Drive chain sprocket worn to excess (6.1.7 (c) (i))

Registration plate lamp missing in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) DANGEROUS

Front Brake indicates slight fluctuation of brake effort (1.2.1 (e))

Rear Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

rear sprocket cushdrive rubbers worn

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust slightly loose bracket holding rear silencer (6.1.2 (a))

Registration plate lamp missing in the case of multiple lamps or light sources (4.7.1 (b) (i))

Rear Rear reflector reflecting white to the rear (4.8.2 (a) (ii))

Registration plate insecure number plate/rear light/rear indicators/rear tail tidy insecure bracket broken (0.1 (a))

Registration plate lamp does not illuminate simultaneously with the position lamp(s) (4.7.2 (a))

Drive chain slightly loose (6.1.7 (c) (i))

Exhaust slightly loose bracket holding rear silencer (6.1.2 (a))

Nearside Rear indicator obscured by rear number plate