2006 Yamaha XT125

day time use only

Headlamp at least one does not illuminate on main beam (1.2.2a(ii))

Offside Front shock absorber seal failed and leaking oil (2.3.3)

Rear Brake disc(s) friction surface contaminated by oil or grease (3.2.A1k)

Rear Brake master cylinder leaking hydraulic fluid (3.2.B1e)

Rear reflector on motorcycle obscured (1.4.2b)

Headlamp at least one does not illuminate on dipped beam (1.2.2a(i)) DANGEROUS

Locking device(s) not correctly fitted which may make the motor bicycle dangerous to ride split link wrong rotation (6.2.1h) DANGEROUS

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4) DANGEROUS

Throttle operating incorrectly (6.2.1f) DANGEROUS

only one seat bolt fitted

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Headlamp aim too high (1.6)

Rear reflector on motorcycle damaged and function impaired (1.4.2a)

Rear reflector on motorcycle incorrectly positioned (1.4.2d)

Throttle has a significant change in engine speed whilst moving the steering from lock to lock (2.1.4)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Drive chain excessively loose (6.2.1d)

Headlamp aim headlamp deteriorated and function impaired (1.2.3a)

Rear reflector on motorcycle missing (1.4.1)

Exhaust is leaking but is not excessively noisey (7.1.1b)

Front suspension has a slightly reduced damping effect (2.3.6c)

Nearside Front shock absorber has light misting of stanchion (2.3.3)

Rear Brake pad(s) close to minimum limit (3.2.A1f(i))

Brake lever has inadequate reserve travel (3.1.3b)

Front wheel bearings have excessive free play (2.3.5b)

Rear reflector on motorcycle missing (1.4.1)

Registration plate insecure (6.3.1b)

Front Tyre has a cut in excess of the requirements deep enough to reach the ply or cords (4.1.2a(i)) DANGEROUS

Front Brake disc(s) slightly pitted (3.2.A1l)

Front suspension assembly has slight free play between the sliding members (2.3.4)

Rear Brake disc(s) slightly worn (3.2.A1l)

Steering movement slightly stiff (2.2.1b)

Advise cut in rear not to cord

Front Brake disc(s) slightly worn (3.2.A1l)

Front position lamp does not illuminate immediately when switched on (1.1.3a)

Front suspension assembly component loose (2.3.1)

Headlamp aim headlamp damaged and function impaired (1.2.3a)

Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))

Steering movement slightly 'notchy' (2.2.1b)