MOT Status
ValidMileage
144,591 miSignificantly above average — investigate
Not all car check providers offer a guarantee. Don't risk buying from services that can't back their data. CarVerify reports include a £30,000 finance data guarantee.
Vehicle Details
All premium checks include
50+ data pointsMOT History
underside of vehicle signs of surface rust and on components
Nearside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Offside Rear Coil spring fractured or broken (5.3.1 (b) (i))
Nearside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Offside Front Brake pad(s) less than 1.5 mm thick (1.1.13 (a) (ii)) DANGEROUS
Rear Exhaust mounting defective (6.1.2 (a))
underside of vehicle signs of surface rust and on components
Nearside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Tyre worn close to legal limit/worn on edge 3mm(205/65R15) (5.2.3 (e))
Nearside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill end to inner wing (5.3.6 (a) (i))
Offside Front Lower Suspension arm ball joint dust cover severely deteriorated (5.3.4 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Tyre worn close to legal limit/worn on edge 3mm(205/65R15) (5.2.3 (e))
Rear Exhaust mounting defective (6.1.2 (a))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill closing panel (5.3.6 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Nearside Windscreen wiper blade defective (3.4 (b) (i))
Offside Front Lower Suspension arm pin or bush worn but not resulting in excessive movement (5.3.4 (a) (i))
Offside Rear Suspension component mounting prescribed area is corroded but not considered excessive sill closing panel (5.3.6 (a) (i))
Nearside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Offside Front Brake disc worn, pitted or scored, but not seriously weakened (1.1.14 (a) (ii))
Nearside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Offside Front Anti-roll bar linkage ball joint has slight play (5.3.4 (a) (i))
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Stop lamp not working (1.2.1b)
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Nearside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Lower Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Front Brake pad(s) wearing thin (3.5.1g)
Nearside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Anti-roll bar linkage ball joint dust cover deteriorated, but preventing the ingress of dirt (2.4.G.2)
Offside Front Suspension arm rubber bush deteriorated but not resulting in excessive movement (2.4.G.2)
Nearside Rear Tyre has a lump, caused by separation or partial failure of its structure (4.1.D.1b)
offside rear tyre slightly deteriorated
Front Brake pad(s) less than 1.5 mm thick (3.5.1g)
Nearside Front brake disc excessively pitted (3.5.1h)
Offside Front brake disc excessively pitted (3.5.1h)
Offside Stop lamp not working (1.2.1b)
How Reliable is the Mazda MPV?
Based on 44,611 MOT tests across 3,157 vehicles.
Top MOT Failure Points
Don't risk it. Know before you buy.
Not all vehicle check providers are the same. Some don't offer a data guarantee, which means if their information is wrong, you're on your own. Every CarVerify report is backed by a £30,000 finance data guarantee.
HW02 DMU is a 2002 Mazda MPV in Silver with a 1,991cc petrol engine. This vehicle has been through 24 MOT tests with a personal pass rate of 79.2%.
Across all 2002 Mazda MPV models, the average MOT pass rate is 69.8% with a typical mileage of 79,256 miles. This particular vehicle has performed better than the average for its year.
The most common reason a Mazda MPV fails its MOT is tyre tread depth below requirements of 1.6mm, accounting for 1,975 recorded failures. If you're considering buying HW02 DMU, it's worth having these areas checked by a mechanic before committing.
The Mazda MPV typically stays on UK roads for around 31 years. At 24 years old, this Mazda MPV is well into its expected lifespan but still has years ahead.
Frequently Asked Questions
How do I check the history of HW02 DMU?
You can check the full history of HW02 DMU by running a full vehicle check. This shows you finance, stolen, write-off, MOT history, mileage records and more.
What year was HW02 DMU registered?
HW02 DMU is a 2002 Mazda MPV, first registered on 17 May 2002.
Is HW02 DMU safe to buy?
The MOT history for HW02 DMU shows 24 tests with a 79.2% pass rate. To check for outstanding finance, stolen markers, write-off history and mileage discrepancies, run a full vehicle check.
Does HW02 DMU have outstanding finance?
Finance checks require a premium vehicle report. This checks against all major UK finance providers to see if there is any outstanding finance on HW02 DMU. If you buy a car with outstanding finance, the finance company can repossess it.
No warranty or guarantee of accuracy is provided for any free data on this page. The data guarantee applies only to information obtained through the purchase of a full check.