1983 Honda Trike

Brake lever has insufficient reserve travel travel in hand brake lever and spongy. (1.1.2 (a))

Brake pedal anti-slip provision missing foot brake. (1.1.2 (c))

Exhaust has a major leak of exhaust gases exhaust joints blowing. (6.1.2 (a))

Front Headlamp aim too low no image pattern. (4.1.2 (a))

Front Stop lamp(s) switch with a delay in operation brake. (4.3.2 (a) (ii))

Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced lower part of frame corroded/holed. (6.1.1 (c) (i))

Rear Registration plate lamp inoperative in the case of a single lamp or all lamps (4.7.1 (b) (ii))

Service brake grabbing severely both rear brakes binding. (1.2.1 (c))

Brake disc worn, pitted or scored, but not seriously weakened both front brake discs corroded. (1.1.14 (a) (ii))

Exhaust noisy (8.1.1 (a))

Vehicle structure is corroded but structural rigidity is not significantly reduced frame corroding. (6.1.1 (c) (i))

play in prop shaft.

prop shaft has slight play in gear box shaft

Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a))

Horn not working (7.7 (a) (ii))

Nearside Front Brake disc contaminated (1.1.14 (b))

Nearside Rear Tyre has a cut in excess of the requirements deep enough to reach the ply or cords side wall (5.2.3 (d) (i))

Offside Rear Direction indicator not working (4.4.1 (a) (ii))

Registration plate does not conform to the specified requirements (0.1 (d))

Front Tyre worn close to the legal limit (5.2.3 (e))