2018 Rieju RS

Multiple body panels missing at time of test

Offside Front Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Pillion seat missing at time of test

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Road spring corroded (5.3.1 (b) (i))

Stop lamp insecure (4.3.1 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c))

Headlamp not working on main beam (4.1.1 (a) (ii))

Multiple body panels missing at time of test

Offside Front Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Pillion seat missing at time of test

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Road spring corroded (5.3.1 (b) (i))

Stop lamp insecure (4.3.1 (c) (i))

Drive chain excessively loose (6.1.7 (c) (i))

Footrest missing Both rear - Pillion seat fitted (6.2.12 (a))

Front Headlamp not working on dipped beam (4.1.1 (a) (ii))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Headlamp aim unable to be tested (4.1.2 (b))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Brake pedal is bent but brake can still be readily applied (1.1.2 (d))

Multiple Body panels missing at time of test

Nearside Mirror loose but not likely to become detached

Rear Lower Shock absorber has a slightly worn bush (5.3.2 (c))

Rear Registration plate deteriorated but not likely to be misread cracked (0.1 (b))

Rear Upper Shock absorber has a slightly worn bush (5.3.2 (c))

Road spring corroded (5.3.1 (b) (i))

Stop lamp insecure (4.3.1 (c) (i))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front brake lever bent but does not affect performance

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

rear seat homemade cover not loose or likely to become detached

wiring loose bellow fairing at front does not affect steering controls

Front Stop lamp not working (4.3.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Front Brake indicates a slightly grabbing brake (1.2.1 (c))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front brake lever bent but does not affect performance

Rear Brake pad(s) close to minimum limit (1.1.13 (a))

Rear Registration plate deteriorated but not likely to be misread (0.1 (b))

rear seat homemade cover not loose or likely to become detached

wiring loose bellow fairing at front does not affect steering controls

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Headlamp not working on dipped beam (4.1.1 (a) (ii))

Headlamp not working on main beam (4.1.1 (a) (ii))

Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i))

Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) DANGEROUS

Drive chain slightly loose (6.1.7 (c) (i))

Front Brake lever is bent but brake can still be readily applied (1.1.2 (d))

Front Brake pad(s) close to minimum limit (1.1.13 (a))

Front Shock absorber has a light misting of oil (5.3.2 (b))

Drive chain slightly loose (6.1.7 (c) (i))

Rear Shock absorber has a slightly worn bush (5.3.2 (c))

Steering headbearing slightly stiff or notchy (2.2.2 (f) (i))

Front Wheel bearing rough when rotated (5.1.3 (b) (i))

Rear Lower Shock absorber has an excessively worn bush (5.3.2 (c))